Thank you! I will try!...

Thank you so much for this, i will try, but i'm sure that my panel is TPM23.1E. Do you have any solution for this model?

I received a new SSB board from ASWO. Previously, the TV wouldn't turn on and showed no lights at all due to a lightning strike, which damaged the original SSB board.

Now, with the new board installed, the TV powers on normally, and the Ambilight is working. However, there is no picture on the screen.

Do you have an NVM file for this board, or is there another solution you can suggest?...

Hello,

I recently installed a new SSB board (model from ASWO) in my Philips 65OLED818/12 FZ1 television after the original board failed due to a lightning strike. The TV now powers on and the Ambilight works, but there is no picture displayed.

I believe the panel ID is TPM23.1E, but I can provide the exact panel code if needed.

Could you provide the correct NVM.bin file for this model and panel? If there is another solution—such as firmware or service mode initialization—I would greatly appreciate your guidance.

Thank you in advance for...