Re: How to remove this message after bios repair of 6th gen hp pc?
yes.
[url]https://www.youtube.com/watch?v=r2ubpyeUOB4[/url]
[url]https://www.youtube.com/watch?v=9T57ktw8n3Y[/url]Re: How to remove this message after...7ktw8n3Y[/url]Re: How to remove this message after bios repair of 6th gen hp pc?
yes.
[url]https://www.youtube.com/watch?v=r2ubpyeUOB4[/url]
[url]htt
reddemonic
Member
Last Activity: 11-01-2023, 11:25 AM
Joined: 06-17-2015
Location: UK
-
Re: How to remove this message after bios repair of 6th gen hp pc?
you need to use (BCU) biosconfigutilty tool to set the system info.
its widely available to download here. once you applied the MDM popup will go away.Last edited by reddemonic; 03-20-2022, 06:45 AM.Leave a comment:
-
Re: How to remove this message after bios repair of 6th gen hp pc?
can you attach your config.txt fileLeave a comment:
-
Re: HP Pavilion All-in-One 24-r100NA
nvm. this is been fixed. there are more identical lines at the bottom without (read only).Leave a comment:
-
HP Pavilion All-in-One 24-r100NA
hi, i've flashed a new bios and in the bios boot screen says MDM is unlocked.
when i run BiosConfigUtility64.exe /getconfig:config.txt in CMD admin mode.
i get this (read only) problem in the config.txt file
i continue typing in anyway..
then i run: BiosConfigUtility64.exe /setconfig:config.txt
but it didnt work because of (read only) problem.
i also try using wndmifit64 but it says "doesnt support this platform"
can someone help me edit this bios for me or is there another...Last edited by reddemonic; 03-19-2022, 03:50 PM. -
Re: LENOVO BIOS AUTO-PATCHER for Supervisor Password Removal
support ThinkPad E15 ?
i've tried running this patch on my file and didnt work.Last edited by SMDFlea; 03-25-2023, 11:57 AM.Leave a comment:
-
how to extract bios and ec from dell.exe?
there are BIOS and EC firmware in the exe and but i don't how to extract from it.
[url]https://dl.dell.com/FOLDER05770328M/1/XPS_9550_1.11.2.exe[/url]
or you can grab from this page:
[url]https://www.dell.com/support/home/uk/en/ukbsdt1/product-support/product/xps-15-9550-laptop/drivers[/url]
i bought an SVOD3 and want to try flash the EC firmware into new chip.
can anyone help me?
thankshttps://there are BIOS and EC firmwa...11.2.exe[/url] -
Re: Wacom Cintiq 13HD Touch Display
i've found it, if any1 want to know.
[url]https://www.aliexpress.com/item/ESD-AZC199-04S-C16FJ-C16-SOT23-6-10pcs-lot/32689495708.html[/url]Re: Wacom Cintiq 13HD Touch Display<...708.html[/url]Leave a comment:
-
Re: Wacom Cintiq 13HD Touch Display
very similar to this chip's design
[url]https://cdn.badcaps-static.com/pdfs/c55915591abc0f0702d9f90d42bddc06.pdf[/url]Re: Wacom Cintiq 13HD Touch Display<...dc06.pdf[/url]...Last edited by reddemonic; 08-11-2018, 05:55 AM.Leave a comment:
-
Re: Wacom Cintiq 13HD Touch Display
24C02WP is a eeprom chip, if the chip is bad then i'll need to make a dump from the good working board.Leave a comment:
-
Re: Wacom Cintiq 13HD Touch Display
bad board:...Last edited by reddemonic; 08-11-2018, 05:33 AM.Leave a comment:
-
Re: Wacom Cintiq 13HD Touch Display
they are there, maybe you have imgur.com blocked.
i've uploaded here, thanks
known working board:...Last edited by reddemonic; 08-11-2018, 05:28 AM.Leave a comment:
-
Re: Wacom Cintiq 13HD Touch Display
hi Sam, i've managed to buy a working Wacom Cintiq 13HD display from eBay.
i've taken a photo of this mosfet.
i cant find "C163H" on google. the chip next to it is "24C02WP"Last edited by reddemonic; 08-11-2018, 04:50 AM.Leave a comment:
-
Wacom Cintiq 13HD Touch Display
power up, but display get static effect and no signal. when i open up i found this ic is burnt.
could be a mosfet that require for HDMI signal to work.
i can see letter "H". multimeter read 0v on all pin. this ic is probably shorted.
no schematic available.
do i need to buy a working one, just to see the ic Markings?... -
Dell 9550 LA-C361P AAM00 Schematics needed
board can power up fine, the board has a minor liquid damaged.
some of these components is slightly corroded. i want to replace these parts
i can see the silkscreen of the chips but i need to know the value of these resistors and caps.
does anyone have this schematic.
cheers...
Last edited by reddemonic; 02-09-2018, 04:29 PM. -
Re: need: Dell E5550 LA-A911P Schematic
ty
Leave a comment:
-
need: Dell E5550 LA-A911P Schematic
the chip in the middle is burning hot, i need to I.D this chip.
thanks -
Re: broken R035 resistor in a PSU
the fuse was dead also. no continuity at all. i cant find anything else broken under microscope. no schematic for this psu and i dont have another know good psu. worth a shot replacing it and see if go on fire again. if cant fix then i just throw in the bin. thanksLast edited by reddemonic; 06-12-2017, 03:01 PM.Leave a comment:
-
Re: broken R035 resistor in a PSU
thanks. only place i found this resistor are on ebay from china.Leave a comment:
-
broken R035 resistor in a PS4 PSU
its a PSU for PS4 Slim
spec for this resistor is: 0.035 Ohms, 3W, 1%, size 1225
this resistor is broken and burnt. i cant find this resistor to buy locally. can i a small fuse as a replacement?Last edited by reddemonic; 06-12-2017, 10:09 AM.
No activity results to display
Leave a comment: