Re: Is this a stuck pixel or some think else
ok cheers will keep using and replace when it gets a bit worse.I only use it for automotive diagnostics anyway.
sam67
Badcaps Veteran
Last Activity: 01-23-2017, 02:16 PM
Joined: 12-07-2009
Location: uk
-
Re: Is this a stuck pixel or some think else
Out of curiosity will it damage my laptop even more using it this way till i replace the screen or should i not use it .Leave a comment:
-
Re: Is this a stuck pixel or some think else
Thanks will have a look and replace....Leave a comment:
-
Re: Is this a stuck pixel or some think else
woops sorry
can you see the link in post 3 ?...
Last edited by sam67; 11-29-2016, 03:24 PM.Leave a comment:
-
Re: Is this a stuck pixel or some think else
Thanks....Last edited by sam67; 11-29-2016, 03:25 PM.Leave a comment:
-
Re: Is this a stuck pixel or some think else
Any idea what causes this ?
Would this screen be ok or would i need anything else ? Thanks.
[url]http://www.ebay.co.uk/itm/NEW-HP-EliteBook-6930p-14-1-TFT-LCD-Screen-WXGA-MATTE-FINISH-/401210630264?hash=item5d6a046078:m:mJD8wfdRgPfXKdEtpdCTWYg[/url]Re: Is this a stuck pixel or some th...een-WXGA-MATTE...Leave a comment:
-
Is this a stuck pixel or some think else
Hi my hp elitebook 6930p developed a black dot that has grown over time on the front of my screen.
Is this time for a new screen or could it be a graphics issue..I have added a photo of the screen .
...
-
samsung dvd recorder sr150m
Any one had any issues with these ..not had mine that long but just after manufacturer's guarantee guess what? the dam thing won't always open the disc tray and when it does it will not play any discs
Power light comes on but that's about it.Anyone one have any ideas what to check for as this is first dvd recorder i have had and not sure what to start with first.
Thanks -
Re: Compaq 1520 just standby light on
Looks like one for the scrap heap then i guess
Leave a comment:
-
Re: Compaq 1520 just standby light on
well anyone have any ideas as i have ran out
Leave a comment:
-
Re: Compaq 1520 just standby light on
Here are 2 pics with panel apart ..Now in pic 1 i have circled the TCP(if thats the right word) now looking at it ,it justs seems to sit on the panel as shown in pic 2 .
should this TCP actually be like that as i would have thought it should attach somewhere ? There is only a thin metal cover that goes over the panel and rests on the TCP ..The top part of the TCP not arrowed to the left in pick 1 does actually attach to the panel and board but not the one i have arrowed ,i would have thought that this should attach some where...Last edited by sam67; 05-31-2010, 07:08 PM.Leave a comment:
-
Re: Compaq 1520 just standby light on
anyone
Leave a comment:
-
Re: Compaq 1520 just standby light on
Took caps out of input board and all were good when tested with esr meter also re soldered inductors etc just in case but still same..any ideas anyone?Leave a comment:
-
Re: Compaq 1520 just standby light on
I think I'll have a go in-circuit first and if i have any back circuit probs i'll take them out.
CheersLeave a comment:
-
Re: Heres a nice site with free ebook on monitors
Forgot to add ,also read the [url]http://www.lcdmonitorrepairebook.com/lcd-monitor-repair/how-to-check-inverter-lcd-monitor/[/url] for some tips on certain problems.Re: Heres a nice site with free eboo...tain problems.Re: Heres a nice site with free ebook on monitors
Forgot to add ,also read the [url]http://www.lcdmonitorrepairebook.com/lcd-monitor-repair/how-to-check-inverter-lcd-monitor/[/url]Leave a comment:
-
Re: HP f1703 Monitor
That is a very nice site and the free ebook is good ..I was reading the tips section and posted the link on this forum as it may help others as it did me....Leave a comment:
-
Re: Compaq 1520 just standby light on
Thanks,trouble is i cannot get to the underside of input board to get at the caps to test for voltage when attached to panel and mainboard attaches directly underneath via a connector ..i could remove caps and test for esr but i feel theres somethink more than just the caps..i could be wrong though....Leave a comment:
-
Re: Compaq 1520 just standby light on
Yes i have micro ver 4 esr meter ..psu is defo fine as i have tested it .. are you referring to caps on the input board for faliure and voltage across ?...Leave a comment:
-
Re: Compaq 1520 just standby light on
Psu is fine ,theres only one connector under mainboard that fits into the panel and that is seated so not sure what to check next ..The psu is an external one .Leave a comment:
-
Re: Compaq 1520 just standby light on
Managed to get this monitor to stay on..Power light is orange then stays green but lines all over screen ..first pic is how it starts then gets more lines the longer it is on..is this a panel problem ..connector is seated right and i could see no physical damage to TCP when i removed panel..any ideas anyone ?...Leave a comment:
No activity results to display
Leave a comment: