Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
I removed the video card from the computer and it start's fine, also it doesn't go crazy when I touch it, so it must be the video card.
I took off the fan cover of the video card, there was a lot of dust. I am going to remove the dust and see if it works.
garrettair
Member
Last Activity: 10-03-2010, 03:53 PM
Joined: 12-06-2009
Location:
-
Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
I have discovered that if I tilt my computer, the video card's fan will go bats**t insane for about 30 seconds. I think I will grease it. How exactly do I get below the fan? Do I un-attach it completely?Leave a comment:
-
Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
I use the generic that came with my computer; a Delta Electroincs Inc. 350w. Most of the other writing is in Chinese.
By funny I mean around every 3 hours or so, the fan goes really loud and sounds like it's hitting something, it goes back to normal after a minute or so.Leave a comment:
-
Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
The loose cap was a 16v.Leave a comment:
-
Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
A strange thing has started to happen. I put my computer in sleep mode a lot. It has always woken up fine, but recently, it will fail to wake up, then try to reboot like a failed car engine. It sometimes works after 5 tries. I removed the video card and everything is fine, so it must be the card. When I had finished putting the caps on, the last one was a little loose, could that have affected it? Also, the fan on the card is sounding funky.Leave a comment:
-
Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
They worked! %100 back to normal. Thanks!Leave a comment:
-
Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
Thanks! For reference, I attached what I bought....Leave a comment:
-
Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
So I looked though the store and found these:
[CODE]
1500uF 6.3v 10mm MCZ Series $1.83 x3
1000uF 6.3v 8mm MBZ Series $0.49 x1
470uF 16v 8mm GD Series $1.28 x3
[/CODE]
I couldn't find any caps like C, D, F, G or H. Is it possible that these type aren't made?Code:Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy? So I looked though the store and found these: [CODE] 1500uF 6.3v 10mm MCZ Series $1.83 x3 1000uF 6.3v 8mm MBZ Series $0.49 x1
Leave a comment:
-
Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
All right, here is a picture of the video card model I have. I shooped it so that the colors match.
Only 2 Large A's are blown
(\n for next line)
A: 3x(FZ78 \n 1500 \n 6.3v) 1x(FZ78 \n 1000 \n 6.3v)
B + E: 3x(FZ79 \n 470 \n 16v)
C: 1x(642 \n SVP \n 330 \n 16)
D: 1x(628 \n SVP \n 330 \n 16)
F: 1x(square \n A 779 \n 1200 \n 4V)
G: 3x(square 7YZ \n 100 \n 16v)
H: 1x(68 \n 470 \n 16 A)
If this is going to be really...Leave a comment:
-
Re: Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
It's that simple? Wikipedia was talking about resistance in perecent. Thanks!Leave a comment:
-
Blown (FZ78 1500 6.3v) on XFX 8600 GT. What to buy?
This is a two part question.
1. Can I buy any capacitor just based on the 1500 and 6.3v, or are there other things that I need to learn?
2. What capacitors should I buy? Two (FZ78 1500 6.3v), and one (FZ78 1000 6.3v) broke. I hadn't even been over using my computer that day.
The two big ones are the 1500's. I take it that means how much it holds?...
No activity results to display
Leave a comment: