hi
ty for your research
i think it is the MP2349,
the Vin is in the 19V range, and output is 3.3V, what i was searching for ...
the other one is only max 16V entry voltage...
bindiou
Member
Last Activity: 12-05-2024, 10:11 AM
Joined: 05-31-2015
Location: Sarralbe , Lorraine
-
hi,
ty for your reply
indeed i found same manufacturer, but even with this, i do not find any 11 pin component
google image, did not help moreLeave a comment:
-
Component identification GCR 958
Hi,
i have a shorted component on my ASUS board FX507GU (TUF F15)
i think it is a step down regulator for the +3.3V on eDP connector for the screen
can someone identify it ?
ty... -
+1.1V on KSO lines (keyboard) instead of 3.3V ??
hi,
i have 1.1V on all the KSO lines on keyboard connector, normally it should be 3.3V.
Any idea of the line missing for this ?
it happened after my customer broke the keyboard connector ...
keyboard connector and EC have already been replaced, and same issue.
on the EC i also have 1.1V only on these KSO lines
motherboard X705UQ/X705UNR , IT8985E
thank you for any advise
* -
Re: Asus g751jy schemetic please rev.2.0
Hi
i am having no power issue here
after the first mosftet i have 0.15V (pulsing up to 0.8V or may be more, but too shortly)
and after secondary mosfet i have 3 to 4 Volts
I have already changed the entry mosfets PQ8801 ans PQ8802 (twice), and the regulator BQ735
i also removed PR8806 to be sure to have no short after AC_BAT_SYS in a sub circuit.
My customer claimed the battery died and after this he got this issue.
Did anyone encounter a same issue and fixed it ?
(i know i could just put a...Last edited by bindiou; 11-17-2018, 04:38 AM.Leave a comment:
-
Re: ASUS N56VM no power
Hi
I am having quite same issue with a N56VM board too.
i have a Ver 2.3 board.
originally, i had a short on AC_BAT_SYS, that went to CPU_VCORE (3 mosfets changed, and CPU dead,)
There is still a short on CPU_VCORE as soon as i plug any CPU
so i guess there is a short after CPU too(that may have originated the VCORE mosfets to blow)
i will see this later,
i plugged NO CPU,
now i have +3VO at 0Volts (no short), but +3VAO and +3VA are present, so i am confused
5 volts are all present.
i changed...Leave a comment:
-
Re: ASUS ROG G750JW Burned SMD Help
hi
put a 15UF 25V tantallum capacitor or something near this value, not lower in voltage.
i tried a 330uF tantallum capacitor, 3 burned in a row ...
i finally used a standard capacitor of 12uF in my case and workedLeave a comment:
-
Re: ASUS ROG G750JW Burned SMD
hi
15uF 25V tantalum capacitor
if it is shorted, there may be another reason, check mosfets for short, BQ735 and the 2 small caps south to the mosfets on your picture. one is 1UF between the 2 mosfets and the other to AC_SYS is a 22pF. mosftly these are the parts i have to change when AC_SYS gets shorted.Leave a comment:
-
Re: List of pin compatible Laptop ICs
hi
is RT8206A compatible with RT8206L ?
i found same pins layout
tyLeave a comment:
No activity results to display
Leave a comment: