I am replacing the caps in the power supply for my Samsung LED TV.
The 3 small caps were readily available from Rad Shack however the high voltage cap I cannot find anywhere. I talked with a tech at Digi-Key and he cannot find it. The Cap is a 450V, 220uF, Hi Vent 105C approximately 4.6 CM in length (not measureing the legs) and approx. 2.5cm in diameter. The problem is the Cap lies flat on the board and legs bent at 90 degrees and about 1cm in length measuring from the 90 bend however the length is unimportant as they can be cut but the 90 deg bend is essential. Does anyone know where...