Hello, few important keys are not working - enter, right ctrl,r-shift, d-pad, backspace, page up,down,end,del.
I want to test if other keyboard will work ok.
I have Toshiba satellite a100 (same manufacturing period) and Medion (pentium M 1.7ghz period) keyboards.
Visually connectors look similar, but I'm afraid of damaging something.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: 3300uf 6.3v capacitor for lga755 pentium 4 motherboard
Is it ok to mix capacitor series in this concrete case?
For example i would use panasonic FM 3300uf 6.3v.
And panasonic FR 1000uF 16V. As they are in local shop, and 1000uf get less stress(or i can order FM, but will need to wait and and they will be twice as expensive).
@mariushm
i guess you mean: nichicon HN > HM >= FM(hm typo?) > FR panasonic?
@stj
Farnell has Radial Can - SMD 3300uf polymod. Or smd are different beast and not suitable...
Leave a comment:
-
Re: 3300uf 6.3v capacitor for lga755 pentium 4 motherboard
Tank you for quick answer, but shipping cost is overkill.
I would like to get something decent from farnell, as shipping would be free.
Farnell doesn't have "rubycon 3300uF 6.3v 10mm MCZ".
Would any of those be good? Panasonic FM Chemicon KZE, Nichicon HD, Nichicon HW, Nichion HM, Nichion HN, Rubycon ZL, Rubycon ZLH, Rubycon ZLG, and Rubycon ZLG.
I'm not looking for the best, but descent solution.
Leave a comment:
-
3300uf 6.3v capacitor for lga755 pentium 4 motherboard
Hello, i need to change 3300uf 6.3v bulged capacitor, on lga755 pentium 4 motherboard.
It's the only big capacitor, mobo is miniatx.
what i see on capacitor:
3300uf 6.3v
KZG
(m) 105°C
5(2)
9n
i'm pretty sure it's 10x25mm.
i wanted to put in 3300uF 10V 105°C 12.5x20mm panasonic fr series, but decided to ask.
In my last question about recapping p3 mobo, i got recommendation for Panasonic FM Chemicon KZE, Nichicon HD, Nichicon HW, Nichion HM, Nichion HN, Rubycon ZL, Rubycon ZLH, Rubycon ZLG, and Rubycon...
-
Re: Right capacitors for old P3 mobo
Now i have all the info for repairs. Thank you, guys.
Leave a comment:
-
Re: Right capacitors for old P3 mobo
>>Those are Panasonic FF series
So those caps are pretty descent, and i don't really need to change them?
As i said, there are no visual signs of caps going bad whatsoever. So i guess i will leave Panasonic ones intact, change all Licon ones, and see how mobo behaves.
About small ones. This is question in general, not about this specific mobo(i will change all Licon caps as advised). In Badcaps.nem Repair Details is written:
>> I mark and remove all the necessary capacitors *680uF and higher*...
Leave a comment:
-
Re: Right capacitors for old P3 mobo
@lti - photos of unknown caps
[ATTACH]112590[/ATTACH]
[ATTACH]112591[/ATTACH]
[ATTACH]112592[/ATTACH]
@momaka - in datasheet Panasonic FM has 4000 vorking hours, fr - 6000h - so, i think, more hours would be preferable?Re: Right capacitors for old P3 mobo
@lti - photos of unknown caps
[ATTACH]112590[/ATTACH]
[ATTACH]112591[/ATTACH]
[ATTACH]112592[/ATTACH]
@momaka - in datasheet Panasonic FM has 4000 vorking hours, fr - 6000h - so, i think, more...
Leave a comment:
-
Right capacitors for old P3 mobo
Hello, I want to repair old Pentium 3 mobo(has isa port...) for some old school fun:
Advance 10B QDI Motherboard [url]http://www.motherboard.cz/mb/qdi/Advance%2010B.htm[/url]
I can't see any bad things on caps, not leaking, not bulged. But mobo started to reboot, works unstable. So i'm thinking - caps are to blame.
i want to change:
1500uf6.3v 105°C, 7 caps, manufacturer - unknown. on side is written:
105°CFF (what FF means?)
1000uf 6.3v 105°C, 12 caps, manufacturer - licon. on side is written:
ltm
105°C(m)
...
-
Re: New Members - please post your introductions here
Hello to all badcaps community and generally smart people. I too wanna be smart person, and don't trow away good tech, witch with some skill, perverseness and friendly advices could be repaired.
I can save environment and save some money, isn't it great.
Leave a comment:
No activity results to display
Show More
Leave a comment: