Re: Antec High current Gamer 750w - restored from death ! But !

[B]Charis[/B]

Thanks for reply, I will check ic for cold joints.. But i dont think that there are those... Antec is pretty good at soldering. But still good thing to check it..

Also im not sure how to test IC output pin with isolated transformer.. Could I use osciloscope?


[B]Behemot[/B]

Yeah AVR meter would be cool, but i will have it after 20-25 days or might more...
And yeah i dont think that coil could be damaged, it has so large awg wires...

Re: Antec High current Gamer 750w - restored from death ! But !

[B]Behemot[/B]

checked that red film capacitor in left upper side, it shows 1.3uf it's rated at 1.5uf. so I guess problem is elsewhere... also checked all capacitors, neither of them look bulked or cracked...
cant measure more than 200uf, so basically my multimeter is useless at this moment...

[B]"Also a problem may be in the PFC coil. This is unit from Delta, they started using these coils with two sepparate windings, I have been told for security reasons or whatever. I am not exactly...

Re: Antec High current Gamer 750w - restored from death ! But !

after writing my last comment I searched for clues on russian forums, one guy was talking about SilverStone 1200W, he had the same problem as me, he discovered that all 2200х16 caps were inflated, he changed them and psu started working normally... so my question has born there, I have various scrap capacitors from dead power supplies, some labels say 16v 22uf, but when I measure it says 15uf.... is that normal ? whats average % difference between label and reality?
and good to know which capacitor brand...

Re: Antec High current Gamer 750w - restored from death ! But !

[B]Behemot [/B]
Thanks again for the answer ! community looks just awesome here !
well ok, I will check capacitors there (my multimeter can measure no more than 200uf(mkf)... and that really annoys me, i'm going to order [URL="http://www.ebay.com/itm/LCR-T3-graphical-multi-function-tester-capacitor-inductance-resistor-SCR-/331566016357?hash=item4d32dfe765:g:eDEAAOSwpDdVZIPW"]http://www.ebay.com/itm/LCR-T3-graphical-multi-function-tester-capacitor-inductance-resistor-SCR-/331566016357?hash=item4d32dfe765:g:eDEAAOSwpDdVZIPW[/URL]...

Re: Antec High current Gamer 750w - restored from death ! But !



Well yeah 400v is deadly for human beings. I carefully tested voltage on idle it was 290 not 311... And when i turned psu on it geve 392v. Is that normal?...

Re: Antec High current Gamer 750w - restored from death ! But !



have no idea what that means.... how much must it be ? 5V ?...

[B]Introduction :
[/B]

hey guys ! I'm new here,for long time I was just reading threads and absorbing information ...
but its time to do something...

my bio:
I live in Georgia(its not so wealthy country, so people here try to just survive and feed themselves)
I have small buisness, basically I'm buying computer parts in USA, then ship them to georgia, and sell them here... with that, I make about 140-150$ a month (i'm 19 years old at this moment, and studying energetics in Georgian technical university... probably need to study english...

Re: Power supply build quality pictorial. part 2

umm, sorry but i have one fast question...
DPS-800 LB - power supply from hp workstation.
will fit in atx case ? if some holes must be created for that, its not a big problem...
i'm also interested, how much 6 pin graphics card power connectors does it have ?
and what means those 6 rails ? i'm kinda confused...

i know there is cpu line 1 and 2
but others :
12vD
12vB
12vM
12vG

(btw sorry for my english...)
and btw, i'm gonna buy...