Re: Toshiba 50HP66 won't turn on



When I have everything unplugged from the power supply, it doesn't cycle constantly, just two clicks of the relay.

With everything unplugged, vs climbs to 1.39V and va starts around .8v and drops from there.

This is what the most interesting connector is labeled.
ACD
RL-ON
S1-by5v
Auto/Normal
VS-ON
5VD
GND
5vctrl


I'm trying to get some good pictures, but I'm not having much luck...

I have a Toshiba 50HP66 that won't turn on. When power is applied, the front led turns red, then about 3 seconds later a relay on the power board clicks and the led turns green. About 1 second after that the relay clicks again and the process repeats itself.

I've unplugged the YSUS and ZSUS boards from the power supply, but I get the same results. I don't see any obviously bulging caps. The fuses are good, and I don't find any shorts between vs and ground on either sus board.

Any thoughts on what I should look at next?

Thanks!

Re: New Members - please post your introductions here

Hi, I'm a handy, DIY type, but I don't have much experience troubleshooting or repairing electronics. I'm looking to learn!

-Steve