Re: Samsung Un55eh6001F

This guide seems to indicate a short on the T-Conn board or solder defects (as in the tabs around the TV are messed up). I don't have a clue how to fix that.

Case 7.

[URL="http://preher-tech.com/documents/lcdtvdisplayfailuresymptomsandpossiblecauses"]http://preher-tech.com/documents/lcdtvdisplayfailuresymptomsandpossiblecauses[/URL]Re: Samsung Un55eh6001F

This guide seems to indicate a short on the T-Conn board or solder defects (as in the tabs around the TV are messed up). I don't have a clue how to fix

Re: Samsung Un55eh6001F

I only plugged one side of the T-Conn panel in and there wasn't a problem on the left side of the screen. Which makes me suspect it is the T-Conn board. But I am no expert like you guys on here.

Thank you for the suggestion for the LCD Test tool, but I think I might be better off buying the parts since it may be more economical. I don't plan on making repairing TV's a hobby.

Thank you for all of your input, it has been very helpful.

Re: Samsung Un55eh6001F

I don't have another TV available to test it with. Does anybody else know any tricks on how to isolate the problem?

I did unfasten all of the cables going into the video card, and then refasten them. It didn't seem to make much of an impact. When ever I did that to the T-Con board I could see how it affected the picture, but in a different way.

Don't mind purchasing both but at this point the value of the TV is only $600 brand new out of the box and I don't want to chase good money after bad.

Hello,

We inherited this TV (Samsung 55 inch TV) which appears to have a bad T-Con board. I am not sure (just guessing here). Would like to have some expert opinions from some people on the board. I took it apart and refastened the ribbons, problem was still there. It's also on top of the screen messages, not sure what that means. I am assuming it's either the T-Con board (because the digital artifacting is only on half of the screen), or it's the tabs that wrap around the TV. I have no idea how to fix the tabs, but the T-Con boards seem to be plentiful on ebay.

...

Re: New Members - please post your introductions here

Hi,
I'm a new member on here with a messed up Samsung Un55eh6001F. I suspect it is the T-Con board but I am not sure. I took a picture of the screen and would like to get some expert opinions on it before I spend money on a new board. It's your classic vertical artifacting noise on just one side of the screen. It also could be the tabs, but I have no idea how to fix that.

Personally, I am a film and video guy who has been doing it for 25 years. If anybody has any post production questions as it relates...