Re: Samsung PN60E530 no picture
After testing voltages on my PN60, I decided to send the Y-Main out for service. I had this done through eBay, but Otex also does this direct through there business. I received the "repaired" board and after installation, I have the same problem. Slow blinking green LED with the ribbon cable connected to Y-main. Before sending my Y-main for repair, I tested my buffers for shorts and did not find any. I suspect that the repaired Y-main board is still the source of my problem. Looking at the repaired board, I can see some solder work but do...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
Leave a comment: