Re: Panasonic TC-P42C2 6 blinks

Bingo. Craigs yielded a few faulty sets. Some quick board swaps and the image has never been better. I now have two working panny 42"s and a stack of known good and known bad parts.

Funny, it feels so good to get a 5yo beater set back on its feet.


Thanks TW2005

Cap

Re: Panasonic TC-P42C2 6 blinks

still dead ended on this...so much time. anyone know about all the revisions for the A boards on these?

Re: Panasonic TC-P42C2 6 blinks

Yes .. I have a nice Fluke and have put it through its paces on numerous occasions. The values and locations to probe are unknown. I have looked for an A board at Jimmy and they are out of stock. Could I rebuild it? Or send it in for a refurb? I could search for a service manual online I guess. I am sure it would have a walk through with step by step diagnosis. If anyone has the inside scoop..please let me know :~}

Thanks

Capacity

Re: Panasonic TC-P42C2 6 blinks

yes... it did flutter and tweak out a bit before the picture went out. When I had the back off it worked great though. Now I cant even get a picture at all... Just the 6 blinks

Thanks for the help

Is there a way to test this component?

CAPacity

Re: Panasonic TC-P42C2 6 blinks

Hi all:

Hope this thread will be of help to me an others

I am a newbie... Just wanted to say hi and H E L P ! I have a strange problem with a Panasonic tc-p42c2 It shown 6 blinks after it warmed up (35 - 40 min) and then it will not show image again until it cools. Took the back off and checked for bulging caps. Nothing. Tightened all fasteners and powered on. Perfect. kept it on for over 2 hrs and no shutdown. Put the back on and now it won't even show a picture when cold. Will post in the right area...

Thanks...

Re: New Members - please post your introductions here

Hi all:

I am a newbie... Just wanted to say hi and H E L P ! I have a strange problem with a Panasonic tc-p42c2 It shown 6 blinks after it warmed up (35 - 40 min) and then it will not show image again until it cools. Took the back off and checked for bulging caps. Nothing. Tightened all fasteners and powered on. Perfect. kept it on for over 2 hrs and no shutdown. Put the back on and now it won't even show a picture when cold. Will post in the right area...

Thanks

Capacity