Re: 2408WFP Power supply component

Hi Budm,
thank you very much for your help !
Very appreciated!
Regards!

Hi,
Hoping for some help. Newbie here.

A component on the mains section of the 2408WFP PS blew up on me this morning.
It's marked MF 715D-15, TR601 on the board (Thermistor ?).

I can't find it anywhere on the net, so I was if someone knew it's value and eventually with what I could replace it.

I've included a couple of photos..
Thanks for the patience and help !...

Re: Smd diode code

Hi
thanks to all for the replies. Very very appreciated !
Yes I am measuring them still in-circuit (mea culpa !). I was going to remove them to test again and make sure they are okay.
Does anyone know of a good reference for the codes of the smd capacitors I could check out to decipher the codes and perhaps complete the schematic.

Thnaks again !

Hi,
looking for some help,
does anyone know the value of these smd's D604, D6655, both faulty ? Are they zener diodes? I've included pictures of them
They're mounted on the power supply board of a Dell 2408WFP.
I was wondering also if anyone knows the values of the smd capacitors (which are unmarked)
C709
C710
C629
C630
C610
C609
C613
C614
C627
C620
C626
C624
C623
C621
C628
(many thanks bicycle6228 for the schematics).
Many many thanks for any help...

Re: Dell 2408 power problem

Hi,
I am in very much the same situation, but I haven't changed anything yet. I tried some simple measurements and it seems D701 and D703 "seem" to be faulty, so I will try to change them .
Have you taken any readings?

Re: Dell 2408WFPb / 2408WFP - No Power

Hi to All,
I am in much the same predicament as Sparrow.
I have a very very very basic knowledge of the matter, but thanks to these forums I have successfully repaired several monitors, except for this one...
The readings (very basic VOM) seem to quite regular throughout the board (comparing them to previous/other threads except for the diode D701 & D703 which seem to be giving a value regardless of how I place the tester leads on the pins.
The only thing I haven't tried is measuring the Vcc value of IC601 as...