Re: panasonic led 32- no standby power no led?
I have 0 volts terminmals 1+2
PA7601 is good
I have 12 v at pin12...
simon.ribeiro
Member
Last Activity: 03-05-2016, 03:14 PM
Joined: 04-29-2015
Location: barcelos
-
Re: panasonic led 32- no standby power no led?
at terminal 2 D7502 I have 12.5 v
at terminal 2 D7501 I have 34.6 vLeave a comment:
-
Re: panasonic led 32- no standby power no led?
ok so,
C7301 Reads 345v dc, c7300 is not fitted to this board.
tp7501-0v
tp7502-0v
tp7503-0v
tp7504-0v
tp7505-0v
tp7506- -5.5v
tp7507-0v
tp7508-0.3v
tp7509-0v
tp7510-0v
tp7511-0.5vLeave a comment:
-
Re: panasonic led 32- no standby power no led?
where can i buy a new board?Leave a comment:
-
Re: panasonic led 32- no standby power no led?
i have removed the board and there is nothing obviousLeave a comment:
-
Re: panasonic led 32- no standby power no led?
no standby voltage with motherboard unhooked
measured ar terminal 8 of P2Leave a comment:
-
Re: panasonic led 32- no standby power no led?
350vLeave a comment:
-
Re: panasonic led 32- no standby power no led?
sorry for delay...Leave a comment:
-
Re: panasonic led 32- no standby power no led?
not sure what a vestel set is?Leave a comment:
-
Re: panasonic led 32- no standby power no led?
i have no stanby power, i am not able to understand the diagram that is what i need help with...Leave a comment:
-
panasonic led 32- no standby power no led?
hi i have a panasonic led 32 tx-32c300e that has no sign of life no power and no standby led,
it has the following power supply board tnpa5364 ad 3p
i am guessing that the power supply is broken but i need help with diagnosis.
at TP7502 i have 0 v should be 5.7v
i dont know how to follow the diagram to find the fault...Last edited by simon.ribeiro; 02-27-2016, 12:33 PM. -
Re: New Members - please post your introductions here
helloLeave a comment:
No activity results to display
Leave a comment: