Also forgot to give thanks to "newtothis"
rageed
Member
Last Activity: 07-13-2015, 05:49 PM
Joined: 04-25-2015
Location: White City
-
Re: Panasonic tc-p65s2 dead 10 blinks
Also forgot to give thanks to "newtothis"
-
Re: Panasonic tc-p65s2 dead 10 blinks
finally able to get back to this !!! thanks again Tw2005 for all your great help !! just want to clarify some points before i send SC for repair.
summery of where i am in respect to this tv.
1) SC board is faulty plan on sending to Moduslink for exchange/repair
2)wanted to ensure that SD and SU boards are not faulty , I am going to check that none of the pins on the ribbon cable are shorted to ground, but I wanted to ensure that I am talking about correct pins/ribbon cable....Leave a comment:
-
Re: Panasonic tc-p65s2 dead 10 blinks
thats what i figured...Leave a comment:
-
Re: Panasonic tc-p65s2 dead 10 blinks
also i tested Q425,Q424, Q422,Q421 D 421 are all show shorted on board is this normal ??...Leave a comment:
-
Re: Panasonic tc-p65s2 dead 10 blinks
Q661 part # is RJP56F4Axxx082p shorted E to C
Q660 part # is RJK6026xxx0617
I will have to pull Q423 can not read part #
sorry I am new to this forum where/who is Modus repair ?? contact info...Leave a comment:
-
Re: Panasonic tc-p65s2 dead 10 blinks
So looks liker the Sc board is where most all troubles reside , would you suggest replacing whole board or replacing components ?? and where to get board ??...Leave a comment:
-
Re: Panasonic tc-p65s2 dead 10 blinks
quick check shows Q661 shorted and when looking closely Q423 is actually blown apart...Leave a comment:
-
Re: Panasonic tc-p65s2 dead 10 blinks
Thanks TW2005 , will checkLeave a comment:
-
Re: Panasonic tc-p65s2 dead 10 blinks
yes good multimeter...Leave a comment:
-
Re: Panasonic tc-p65s2 dead 10 blinks
looking at the board allocation I do not believe this set has a sc2 board ?? so i disconnected the SC board and now I have 6 blinks
Am I correct that this set does not have a sc2 board ??...Last edited by rageed; 04-26-2015, 01:19 AM.Leave a comment:
-
Re: Panasonic tc-p65s2 dead 10 blinks
Thanks tw2005 I will do this and report back...Leave a comment:
-
Panasonic tc-p65s2 dead 10 blinks
Hello everyone I have a Panasonic that I am attempting to repair, when plugged in I can hear 2 relays , then nothing other red Led on front blinks 10 times , then repeats ,
from what limited info I can find I believe that trouble points to the A board .
Looking for any advice anyone can give
thanks in advance -
Re: New Members - please post your introductions here
Hello everyone just found and joined this forum, loos like there is a wealth of knowledge on this forum, oh ya reside in CanadaLeave a comment:
No activity results to display
Leave a comment: