Re: Samsung PN59D530 Won't Turn On
So did you swap the main board?
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
50pn6500 shut off when toutching volume or mute button
I do have a LG 50pn6500 and it works great if untill i toutch toutch the volume or mute button after the tv is on for let say 15 minutes. If i press on it it shut off for a few minutes then come back on after a few minutes and still working great.
-
PN50C550G1F Thin black horizontal line
My neighbor has that problem and I want to get some opinion about it it's only a bad Y buffer or something like that or if it could be a bad panel?.....Last edited by husky601; 12-08-2015, 09:37 AM.
-
Re: TC-P50G20 Panasonic 50" Plasma 4 blinks / 10 blinks
TW2005 YOU SAID, you can test the SU/SD boards. If they test with no shorts or low resistances then I'd re-use them.
I found placing the red probe to the gnd plates and black to the pinouts gave the most accurate result for resistance.
I use my black probe on my pin number 1 to 9 of SD42 and SU41 but i just try to figure which point you are using from there to get your resistance? Can you tell me from where to where i have to put my probes to get the resistance? Thank you.
AlexLast edited by husky601; 11-19-2015, 09:26 PM.
Leave a comment:
-
Re: Sony KDL-46Z4100 another TCON problem?
Did someone here was able to fix it or can confirm this is the panel it self? Thanks!!
Leave a comment:
-
Re: Samsung ln46c650l1f
At the start the back light is pretty strong but for a fraction of second. I do have 2 other faulty power suply of the same model so i will try to swap a few component from bord to board to see if it can change something. Thank you!!
Alex
Leave a comment:
-
Re: Samsung ln46c650l1f
Yes i don't know what i would try next.......
Leave a comment:
-
Re: Samsung ln46c650l1f
Ok thank you!! Already did theses 2 fix but no chances. If i am asking to get more power the back light shut off. Like if i do a volume test and if i raise the volume on the roof or if i plug the HDMI cable back light shut down. Thanks for your tought!!!
Leave a comment:
-
Samsung ln46c650l1f
Hey guys!
i do have a problem of i would believe the back light on my tv. All the settings seems to work fine but from the left to the right the screen is geeting darker. I just want to get some opinions. Thank you.
Alex...
-
Re: Samsung LN46A550 Power Cycling
zdsh07p9 did you figure what your problem is? I would think you will have to change the Voltage Regulators - Switching Regulators and the Schottky Diodes & Rectifiers.
Parts are available here: [url]http://ca.mouser.com/Search/ProductDetail.aspx?R=CD214A-B240LFvirtualkey65210000virtualkey652-CD214A-B240LF[/url]
[url]http://ca.mouser.com/Search/ProductDetail.aspx?R=MP2363DN-LFvirtualkey57380000virtualkey946-MP2363DNLF[/url]
AlexisRe: Samsung LN46A550 Power Cycling<b...sh07p9 did you...
Leave a comment:
-
PN50A450P1D vertical line
Hey guys,
i just want to get some opinions about the problem i have with my tv. Here are the pictures....
-
Re: Lg 55ld650
I did put the motherboard in the oven then re instal it in the tv and it did work but shut down every few minutes then turn on again by it self. Do anybody has an idea of what it could be?
Leave a comment:
-
Re: LG 42LD560 - Worth fixing?
Ok thank you much!! I did put the motherboard in the oven then re instal it in the tv and it did work but shut down every few minutes. Do anybody has an idea of what it could be?
Leave a comment:
-
Lg 55ld650
I do have a problem with my TV. When i plug the tv the standby light turn on. As soon i press on the power, the chanel or the volume on the standby light flash non stop and nothing happen. On the main board there is a small black buton, i guess it's a reset? If i plug it in and press on the small buton the back light turn on but for 0.1 second then shut down again. Any idea?
-
Re: LG 42LD560 - Worth fixing?
C9113. Dosent looks like a resistor, what is that?...
Leave a comment:
-
Re: LG 55LD650 - Worth fixing?
I have similar problem and i can not find any mother bord for it. When i plug the tv the standby light turn on. As soon i press on the power the standby light flash non stop and nothing happen. On the main board there is a small black buton, i guess it's a reset? If i plug it in and press on the small buton the back light turn on but for 0.1 second then shut down again. Any idea?
Leave a comment:
No activity results to display
Show More
Leave a comment: