Re: Sceptre X22 WG Gamer With Replaced Caps Turns off after 5-10 minutes
Glad to help. Mine has been working well for 2weeks and counting!! :P
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Sceptre X22 WG Gamer With Replaced Caps Turns off after 5-10 minutes
Sorry That I have been out for a while. Here is my parts list from digikey:
digikey# 493-1575-ND, mft# UE1V330MDD CAP 33uf 35v Elect HE Radial
digikey# P12388-ND, manufactures# CAP 470uf 25v ELECT FM Radial
Hope this helps.
Leave a comment:
-
Re: Sceptre X22 WG Gamer With Replaced Caps Turns off after 5-10 minutes
I purchased the Caps at a local electronic shop not Radio Shack. I did use some caps rated at 470uf 35v, Rather than the 470uf 25v. The tech at the shop said it would not be a problem.
To turn the monitor back on I push the Power button.
Leave a comment:
-
Re: Sceptre X22 WG Gamer With Replaced Caps Turns off after 5-10 minutes
I cannot find the indications of the functions on the connector Pin at the top of the Board.
I turn off the monitor using the buttons on the front of the monitor.
I used nichicon Caps series B8035 and MERITEK no series numbers.
I took some more pictures of all sides of the board.
Thank you again....
Leave a comment:
-
Re: Sceptre X22 WG Gamer With Replaced Caps Turns off after 5-10 minutes
Sorry, I'll get the Specs on the pins. I used the monitor for about 2 years then it just went black. I stumbled across this forum and thought I would give it a try. I will get pictures and post them. Thank you for our help.
Leave a comment:
-
Sceptre X22 WG Gamer With Replaced Caps Turns off after 5-10 minutes
Greetings,
I have a Sceptre 22" monitor that I have replaced the Caps on. They were Capxon Good stuff?. Before I attempted to replace them the monitor would not turn on. The led would blink off and on.
Now I have replaced them and the monitor turned on bright. After 5 minutes it turned off. I then turn it back on and after 5-10 minutes it shuts off. I have lowered the brightness which did not help. I checked both the VGA and DVI connections and they work.
Before I gave up I thought I would give you guys a shot at my problem. I am leaning to the Transistors...
No activity results to display
Show More
Leave a comment: