Hey guys, i have a JBL sub here. its a venue sub12 model.
These are known for bad caps, catching fire and so on.
I have repaired the board once, fixed the typical popping and clipping at low volume.
i repaired it a second time for another capacitor blowing and also catching fire, i replaced every cap except the two high voltage ones.
its here again because a transformer blew. The owner didnt use a power strip and it caught fire once again. i replaced c72 once again and it still sounds staticy and scratchy. its also very quiet compared to what it used to be.
anyone...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
JBL venue sub12 staticy
-
Re: TNPA5623 Panasonic tc-p50ut50 short?
I've already completed the install. The tv when turned on trips the breaker in my house
-
TNPA5623 Panasonic tc-p50ut50 short?
Hey guys, i have this panasonic plasma here and it had the typical problem with the ss having a bad ground because of the screws they used.
I bought the repair kit from shop jimmy to repair the board myself.
I completed the repair and noticed a couple of traces were damaged around the 8 pin IC. i repaired them and checked them with a multimeter.
I plugged the TV in and it took about 3 seconds then i heard a relay switch on and it tripped the 15A breaker in my house.
Is there any way to troubleshoot this SS board?
If i unplug the SS board it does the 8 blink...
No activity results to display
Show More
Leave a comment: