Merry Christmas and happy new year to the entire BADCAPS community

What are the elements that could bring the line to 1? Any advice on what I could check or do?
Thank you​

Can we try to do some tests for study purposes too or will I take it straight to the bin?

Sorry I didn't understand, I measured the resistance is 10k on the pin RSMRST# of SIO

Hi, the RSMRST# resistor is 10k, I checked the voltages on the SUPER I/O and I realized that the 3v on pin 11 is missing.
I checked the voltages on IC PU11 and on the PC204 capacitor I have no voltage​.....Short circuit on the 3.3v line or problems on ic PU11?

Thank you and good day....

Thanks for the reply, I checked the various points on the card and found these values:

01:No visually damaged components
02:Tried rewriting the bios
03:RTCRST#= 2,746 v
SRTCRST#= 2,744 v
04:RSMRST#= 0 v
These are the values ​​found, is the situation serious?

Hello community. I need your help to resolve the problem with my HP envy 15 notebook mod.15-k111nl. The problem is the following: inserting de connector of the notebook, the LED on the connector lights on but if I pressed the power button it doesn't happen Nothing.
I did some tests to verify where the fault could be and I noticed there are 3v but the 5v does not arrive.Furthermore I have a series of mosfets that seem to be in short circuit but desoldering them and testing them on the bench they are good. These are the signals that I found:
PL8:3,117v----PL9:0v---PL12-----PL13:0---PL16:0v---PL20:0v---PL16:0v----PL13:0v--...

Hi AL._.EX thank you very much for your precious help, I hope to be able to repair the notebook.😉👋

Good morning everyone, I'm trying to repair my HP Envy 15 K111 notebook motherboard: DAY31AMB6CO REV.C. I'm desperately looking for the boardview, could any of you kindly post the link where I can download it?
Thank you.​...

Ciao a tutti, sono Maurizio e vivo in Italia sono un manutentore elettrico industriale con la passione dell'elettronica e dell'informatica.
Spero di imparare cose nuove e interessanti in questa community e spero di riuscire a dare anche il mio contributo. Premetto che il mio inglese è un po arrugginito ma farò del mio meglio per farmi capire. 😁...