Re: Request: Need Help Regarding Mobo Display

Thanx Galvanized

Really Appreciate you Co-operative Nature

Re: Very basic questions you're afraid to ask

Can you tell me, how can we check the ATX SMPS (PSU) Directly Just By Shorting.

From the ATX 24pin connector there are two such wires that if we short those two wires SMPS fan starts spinning.

Can you tell me clearly about it.

Re: Request: Need Help Regarding Mobo Display

What If There Is No Booting No Display and Front Panel Leds turnned up, PSU fan and mother fan is spinning, Monitor Led is blinking.

How to fix the problem.

Request: Plz Help :No Booting...........No Display

Day before yesterday I worked on my PC till late hours. The very next day I turned on my pc and it got stuck. No booting, No display, No Beep nothing. But the LEds on the cabinate were turned on and monitor LEd was blinking.

I unscrewed the cabinate and clear the CMOS but nothing happened. Then changed the Jumper and left the main board for the whole day, there after nothing happened. Checked the mobo for bad cap or some burn outs. Nothing of that sort was found.

CMOS battery is working fine. Onboard...

Re: Request: Need Help Regarding Mobo Display

I accept everyones view. But all of you tell me when everything is fine, CMOS is functioning properly, CPU turns on, No bad caps, No burning, No shorts on mobo, No beep representing any error eg. RAM BEEP DISPLAY BEEP, monitor is functioning properly, then also getting no display. WHY
I myself installed a new battery, clear cmos and left if for 8 -10 hrs. Thereafter I was standing alone.

Then you guys tell me whats the problem.

Today I enquired someone about the related matter and they said something...

Re: Request: Need Help Regarding Mobo Display

Thanks Galvanized for replying and seeing the problem.

No he never replaced the battery or removed the jumper. He did something else which I tried to ask him but he refused me to tell.

I got on Intel Motherboard 845. One day when I turned on my PC, CPU lights were on and monitor green light was blinking with no display. Unable to find out what went wrong, all caps were in order, no burning or nothing of that sort.

I took it to some techie locally. They repair mobo using CROs. He took the board and went in the other room. (Glass Partitioned). I don't know what he did but was sure no use of soldering iron, no multimeter or anything.

He just placed the a RAM, Processor and plugged the display cable in the display port. He then touched somewhere near...