Re: Hanns G HG281D 28 inch display flickering on startup

For the main board i changed: C80, C83: 100UF 16V Low ESR type 105C.

With 470uF 25V, with some Chinese Caps... Running perfectly fine now.

I had vertical weak lines, flickering, blackout... black or dark content would run better/longer than white..

The two 1000uF 25V on the powerboard and the regulator were hot when disassembling the HG281D.. Did nothing with that ... Would that be a problem later?

Thanks a lot for this forum .. Saved me a 28" secondary monitor :-)

Re: New Members - please post your introductions here

I'm repairing my own stuff.. Just need some help sometimes :-)
Hi, to everyone...