Re: LC46XD1E repair
Yes the 5 volts are present but the problem is with those 2 capacitor marked with "red circles on the picture" 1 capacitor have 100v but when they are active they releasing only 82v!
marco1000
New Member
Last Activity: 03-27-2015, 02:18 AM
Joined: 03-18-2015
Location: Kigali
-
Re: LC46XD1E repair
Yes I've tried Alastair's solution but unfortunately the sharp does not turn up. on check the attached picture that i took, I think the problem is with the board if you check the picture above that i have uploaded you will see the area with the red lines are the one having problems...Leave a comment:
-
Re: LC46XD1E repair
When you connect the circuit the relay will pup without stooping and then the current Which goes to the red of the screen will not start, is there any replacement tools needed for this board so that the current goes to the screen?...Leave a comment:
-
Re: LC46XD1E repair
The problem is that the power supply PSC 10189DM PKG1 does not release the current to the screen!...Leave a comment:
-
LC46XD1E repair
Hello am trying to fix this sharp LC46XD1E it have the problem of motherboard of PSC10189dm PKG1 which does not release the current to the screen and the lights does not light up. Am not able to upload the picture because am new on this forum but if you know something plz reply thank you. -
Re: Sharp Aquos LC-46XD1E no power-up
Hello everybody am trying to fix this sharp shown above by Khron666 it have the problem of motherboard of PSC10189dm PKG1 which does not release the current to the screen and the lights does not light up. Am not able to upload the picture because am new on this forum but if somebody know something plz reply thank you....Leave a comment:
No activity results to display
Leave a comment: