Re: Samsung PN50A530S2F Plasma TV
I know this an older thread, but Any luck finding the fault?
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Panasonic TCP42S30 won't power up. 6 red LED blinks
Ok. Retested the components you suggested in your pics. Black probe to tab in blue and red to leg in green.
My results from top to bottom in reference to the pics of same components added..
Top to bottom order:
1st= 497
2nd=497
Second group:
3rd=395
4th=395
Are these normal?...
Leave a comment:
-
Re: Panasonic TCP42S30 won't power up. 6 red LED blinks
[QUOTE=newtothis;555022]
Gonna replace battery..Re: Panasonic TCP42S30 won't power up. 6 red LED blinks
[QUOTE=newtothis;555022]
Gonna replace battery..Re: Panasonic TCP42S30 won't power up. 6 red LED blinks
[QUOTE=newtothis;555022]
Gonna replace battery.....
Leave a comment:
-
Re: Panasonic TCP42S30 won't power up. 6 red LED blinks
[QUOTE=newtothis;555015]No can test it outside the set[/QUOTE
I am getting fluctuating readings going up and down with mm set at 2000k.
1-2=800 and rising
1-3= 900 rising
2-3= 70 rsing.
I probe and reprobe. They are very different each time. Is my mm not functioning correctly??? I'm not 100 %. 😫Re: Panasonic TCP42S30 won't power up. 6 red LED blinks
[QUOTE=newtothis;555015]No can test it outside the set[/QUOTE
I am getting fluctuating readings going up
Leave a comment:
-
Re: Panasonic TCP42S30 won't power up. 6 red LED blinks
I have the ss board disconnected. Do I need to hook it back up first before testing? And the TV is no plugged into an outlet. Fyi...Last edited by Cosy0201; 04-28-2015, 06:13 PM.
Leave a comment:
-
Panasonic TCP42S30 won't power up. 6 red LED blinks
Hi there. New to this forum. But been reading a lot of posts and comments. Very informative and helpful. Ok here's my TV problem:
Turned on the tv one day, heard the TV clock, then buzzed for a second. No signs of life on screen through whole process. Red LED flashes 6 times in sequence. Only way to sut down TV is to unplug it from the outlet. This fault was not gradual overtime. I took the back over off, and visually inspected the psb. No burn marks on surface. All caps looked normal except one. A 250v 300 uf top one on the right side- The top looks flat- kinda-Borderline bulging. Unplugged...Last edited by Cosy0201; 04-28-2015, 05:42 PM. Reason: Correction: I used the wrong terms for the ysus and xmain. It should be SN and SS resPectively
-
new member Cosy from MN
Hi. My name is Cosy from MN. New to this forum. Trying to soak up some knowledge if you're willing to share you're some. Just started repairing TVs in my spare time for the past year. Also been reading very informative threads on here before I joined. My experience with electronics is limited. 😁 but hopefully that will change. I don't know what else to tell you
Leave a comment:
No activity results to display
Show More
Leave a comment: