Re: Samsung SyncMaster 226BW
Correction: 2.2 cap (not .22)
krickster
Member
Last Activity: 11-06-2009, 11:38 AM
Joined: 10-24-2009
Location:
-
Re: Samsung SyncMaster 226BW
YEAH!!
Works perfectly!!
Thanks Toasty for your help, YOU DA MAN!!
Some tidbits for others with this monitor:
- Careful with the .22 cap. The positive hole is right on the edge of the track and I was afraid I had screwed my board because I had to mess around longer with the iron than I would have liked. Of course, only time will tell if I did mess it up or not.
- As noted in last post, the LCD plugs to the inverter are Blue-Pink-Pink-Blue, in case you didn't note them.
...Leave a comment:
-
Re: Samsung SyncMaster 226BW
Nevermind! I got it! Pink Inside, Blue Outside
So, it goes Blue-Pink-Pink-BlueLeave a comment:
-
Re: Samsung SyncMaster 226BW
YIKES!
Stupid me, I forgot to note the wiring locations from the lcd screen to the inverter. 4 wires, 2 pink and 2 blue, but don't remember what order they plug in.
Hopefully someone with a 226bw is following this thread. If so, could you post a pic or describe the order?
Thanks,
KenLeave a comment:
-
Re: Samsung SyncMaster 226BW
Thanks again for your time Toasty.
I will be placing the order today and will report back this week. I'm sure there will be more questions as I work through this. The great thing about this is I now will think twice before chunking "bad" electronics and maybe attempt to fix them myself first
I was getting ready to chunk the monitor and go get a new one when I stumbled on this site (keywords: 226bw blue light bad flickering problem)
I noticed in this thread (or the 225bw thread) someone recommended a 30w for...Leave a comment:
-
Re: Samsung SyncMaster 226BW
I am looking to double the quantities so I can replace immediately in a couple of years if needed.
What is the shelf life on capacitors? Is it worth it or just wait till I get to that bridge?
Thanks again,
KenLeave a comment:
-
Re: Samsung SyncMaster 226BW
THANKS TOASTY!!
Here is pic as well....Leave a comment:
-
Re: Samsung SyncMaster 226BW
Thanks Toasty.
BTW, I just noticed that I mangled the locations in my list (e.g. multi C107s and C113s). That's "Cut-n-Paste" damage
Upload shortly
KenLeave a comment:
-
Re: Samsung Syncmaster 225BW
I have a similar issue with the 226BW, but with a slight twist:
[url]https://www.badcaps.net/forum/showthread.php?t=7900&page=2&pp=20#post84580[/url]
Thanks,
KenRe: Samsung Syncmaster 225BW<br /> ...ks,<br /> KenRe: Samsung Syncmaster 225BW
I have a similar issue with the 226BW, but with a slightLeave a comment:
-
Re: Samsung SyncMaster 226BW
In reading the Newb instructions on this site, I noticed it says that I can change the Farad rating slightly as not to exceed the 20% tolerance, correct?
Add that to the fact that Buzz's config was 3x820s and 2x680s (again, slightly diff 226bw version), can I conclude that I could replace my 5 x 820s with 680s ?
If so, do either of these 2 look to fit the bill?:
EEU-FC1E681
or
ELXZ250ETD681MJ20S
I also want to make sure that I don't get an incompatible series since I still haven't...Leave a comment:
-
Re: Samsung SyncMaster 226BW
Found this forum as a newb trying to fix my Samsung 226BW
However, I have diff caps and layout than buzz's. Must be a diff version of the 226bw
In any case, I am trying to id replacements and have come up with the following. Can someone take a looksy and see if I got it right?
CURRENT HAVE:
*C105 150uF 450v (M) 105 °C 0725 (VENT?) 20mm D x 36mm H
*C107 47uF 50v KM 105 °C P729 VENT 6.5mm D x 10mm H
*C107 22uF 50v GL 105 °C C727 VENT 6.5mm D x 10mm H
*C107 2.2uF 50v GL...Leave a comment:
No activity results to display
Leave a comment: