By the datasheet diagram I can confirm that this is it or at least it is equivalent. Has the same pinout. I will place an order for it and give further feedback as soon as I got. Thanks again
...
TecnicaNTT
Senior Member
Last Activity: 06-04-2025, 03:38 AM
Joined: 02-23-2015
Location: PVZ
-
Thank you!
By the datasheet diagram I can confirm that this is it or at least it is equivalent. Has the same pinout. I will place an order for it and give further feedback as soon as I got. Thanks again...
-
QNAP TS-231K Component Identification
Hi all,
Need some help identifying a component with the marking "PH2" belonging to a QNAP TS-231K with motherboard model QY42 REV 5.0.
It's supposed to send 12 volt to the main circuit but only send 3.52Volts. If i bypass the 12 volts directly the motherboard powers up, but no boot.
Regards... -
I think you have a hardware problem, because my BIOS came from a working unit. And since the second BIOS provided by [B][URL="https://www.badcaps.net/member/391642-hoaca388"]hoaca388[/URL][/B] does the same I think there is no doubt.I think you have a hardware problem, because my BIOS came from a working unit. And since the second BIOS provided by [B][URL="https://www.badcaps.net/member/391642-hoaca388"]hoaca388[/URL][/B] does the same I think there is no doubt.I think you have a hardware problem, because my BIOS came from a working unit. And since the second BIOS provided...Leave a comment:
-
Bumping this thread because I really need this......Leave a comment:
-
First thank you for the effort.
Second do you care to elaborate what you did?
Because extreme fan spin and shutdown still occurs after some minutes sadly
...
Leave a comment:
-
Hi, Attached a working BIOS with your DMI data merged....Leave a comment:
-
New try... Attached....Leave a comment:
-
But it is! Download, decompress and check before afirming it is corrupted!...Leave a comment:
-
What do you mean corrupted? I downloaded it and opened with HEX editor and it's all fine. Laptop boots up fine with this file....Leave a comment:
-
Infromation added and corrected as per rule request. Sorry...Leave a comment:
-
Worked flawlessly! Thanks once again for the extraction and for the explanation so in the future I can look first in the BIOS for it....Leave a comment:
-
Thank you very much once again. I'll give a flash and comeback with news....Leave a comment:
-
Convert Clevo PC70DD to UMA
Can somone please help me unlock or convert this Clevo PC70DD2 BIOS to UMA only?
The motherboard just burned a hole in the GPU VRAM VRM circuit and now there is a 19 Volt short spread across the GPU and VRAM side. I isoalted both circuits from the rest and now I can get the laptop to work and display image with integrated Intel graphics but crazy fan spin and shutdown after some minutes because of missing dedicated Nvidia GPU.
Laptop: Clevo
Model: PC70DD2
Serial Number: [FONT=Arial]NPKC70DD2000E0017S[/FONT]
Motherboard P/N: 6-77-PC70DD2-N02C-1D
Motherboard... -
Can somone please help me unlock this Clevo PC70DD2 BIOS? It is a InsydeH20 BIOS but the motherboard just burned a hole in the GPU VRAM VRM circuit and now there is a 19 Volt short spread across the GPU and VRAM side. I isoalted both circuits from the rest and now I can get the laptop to work but crazy fan spin and shutdown after some minutes.
Laptop: Clevo
Model: PC70DD2
Serial Number: [FONT=Arial]NPKC70DD2000E0017S[/FONT]
Motherboard P/N: 6-77-PC70DD2-N02C-1D
Motherboard S/N: NKPC70DD2000E00176Can somone please help me unlock this Clevo PC70DD2 BIOS? It is...Last edited by SMDFlea; 11-12-2024, 07:30 AM.Leave a comment:
-
Thank you!
Here is the BIOS dump. If you succeed to extract de EC could you please indicate the area where it is located for future reference? Or what I should look for to identificate the EC area in a BIOS dump?...Leave a comment:
-
DAG71MB16D0 REV: D EC Dump
Hi,
I am in need of an EC dump for this motherboard: DAG71MB16D0 REV: D with a ITE IT8987E that got badly corroded. It is for an HP latptop model [FONT=Arial]15-CC504NP[/FONT] and with the following serial number: [FONT=Arial]5CD7244H6T[/FONT].
The original got water damage and is badly corroded and missing pins so I can't read a dump from it to flash the new one.
Attacched some pictures if it helps.Hi,
I am in need of an EC dump for this motherboard: DAG71MB16D0 REV: D with a ITE IT8987E that got badly corroded. It is for an HP latptop model [FONT=Arial]15-CC504NP[/FONT]... -
Thank you!
Worked flawlessly. Laptop is up and running with correct info....Leave a comment:
-
Thank you! I have some ITE 8225E on order and incoming and will give an feedback as soon as I got one....Leave a comment:
-
Brand: Asus
Model: S432F
Serial: L1N0CX041160024
Motherboard Model: X432FA REV 2.1
BIOS backup and Images from Motherboard info and Laptop info attached....Leave a comment:
-
bump, really need help for this!Leave a comment:
No activity results to display
Leave a comment: