Sound comes on with no picture, Able to hear different inputs, cable box, iPhone, ect…
Cards look OK, no burns or budging caps, Standby power OK, Plug unit in and turn on via remote VS goes to 207 and then drops, VA goes to 58 and then drops,
Replaced Y sus and Y buffer, no luck, same issue.
Replaced logic board, same issue
Replaced X sus, picture came on for about 5 minutes then went off, now when I apply power it just cycles on then off. When I disconnect the X sus power connector it goes back to the orginal failure mode, sound no picture?

Re: New Members - please post your introductions here

Hello,
Looking to learn what I should have learned a long time ago.