Re: RCA L32WD12 Power Supply Problems
Thanks__budm--The problem was in the Main AMPS Board (12v Caps--cs7,cs8 cs32 ) & the ( 24v Caps--cs2, cs3, cs43 ) listed by JELittleton Above. After looking more closely at his
Listing of Schematics ( Approx 30 ) I found it. Since I had Drilled out some of the Apparently Plated-Through Holes--I needed to run wires back through the holes to complete the circuit--I am not a complete Novice , but almost missed this.___JCS8274
Leave a comment: