Re: Panasonic TC-P50C2 6 Blink Code Problem

I will Get pictures up today. And Voltages.

But off the top of my head, I have replaced the Poower Supply with a working power Supply I had laying around, also I have reflowed the Bottom of both SC and SS Boards. Have tested Components on both. But I can still get voltages, And replaced the SC board it was cheap so just replaced it. Still no luck

I am leaning Toward MainBoard.

Re: Panasonic TC-P50C2 6 Blink Code Problem

It was not the SC board I ordered. I am having problems Locating the issue any help would be apprecaited or any ideas.

This Panasonic has me fairly stumped. The problem Once plugged in, and you go to turn the TV on. You hear what sounds like normal clicks of the power supply, and sounds like it wants to fire up but then you hear 1 more click and shuts down and you have a 6 Blink code.

I have followed The trouble shooting guide below.

[url]https://archive.org/stream/Panasonic_2010_PDP_S2_FHD_Troubleshooting#page/n67/mode/2up[/url]

After removing the SC 20 Ribbon Cable and C10 ribbon cable. I power up and get 8 Blink code. Which Suggest the SC board is bad. I pulled...

Re: New Members - please post your introductions here

Awesome Forums,

I have been using Badcaps.net for over 3 Years. The information provided is very useful, and the techs seem to be very knowledgible. Looking forward to finally joining in on the conversations, and support.