Re: Lg plasma 60pa5500 picture issues
Thanks for all the help guys
Nrollins04
Member
Last Activity: 02-08-2015, 03:46 PM
Joined: 01-13-2015
Location: Greenville,sc
-
Re: Lg plasma 60pa5500 picture issues
Ok thanksLeave a comment:
-
Re: Lg plasma 60pa5500 picture issues
Shinju- if you are referring to the two other pots on the y-sus board below the -VY and Vsc then unfortunately yes I thiught I was just tighting up a screw when I first installed the new board. which was done prior to finding this forum.
Tom- Sorry for my lack of understanding but what do u mean by "across". I was able to get correct reading on the Vs and Va because the test point was clearly out lined on the board. Is the picture of the y-sus board clear enough that you or someone could point out the proper place...Last edited by Nrollins04; 01-27-2015, 08:51 AM.Leave a comment:
-
Re: Lg plasma 60pa5500 picture issues
Thanks for helping I'll make the Vs adjustmentLeave a comment:
-
Re: Lg plasma 60pa5500 picture issues
Voltage settings. If I'm testing correctly VS 216 VA 58 Found the proper test points for those. Vsc is 67 -VY is 63 this is touching one of the legs where the plastic adjustment screw is....Leave a comment:
-
Re: Lg plasma 60pa5500 picture issues
X-sus...Last edited by Nrollins04; 01-26-2015, 09:15 PM.Leave a comment:
-
Re: Lg plasma 60pa5500 picture issues
Main power board...Last edited by Nrollins04; 01-26-2015, 09:43 PM.Leave a comment:
-
Re: Lg plasma 60pa5500 picture issues
Y-sus...Leave a comment:
-
Re: Lg plasma 60pa5500 picture issues
Ok thanks. I'll put a pic of y sus board up. When I installed the new y-sus board I turned the plastic screws all he way right thinking I was tighting everything up. I turn them all the way left and everything started working correctly wish I had know what they were from the get go. Glad I came back here to see what u guys said....Last edited by Nrollins04; 01-26-2015, 09:01 PM.Leave a comment:
-
Re: Lg plasma 60pa5500 picture issues
not sure what the little plastic screws that go in to the vac and -vy do but I turned them all the way counter clock wise and it came on and stayed on. But he screen was still not right. Pixels were showing rainbow and still had a big black spot In one corner. Thinking there are two more plastic screws on the y-sis board what can it hurt to turns those as well and the picture appears to be fixed. Can someone tell me what those plastic screws do ? Thanks in advanceLeave a comment:
-
Re: Lg plasma 60pa5500 picture issues
BumpLeave a comment:
-
Re: Lg plasma 60pa5500 picture issues
164 hv with the com on the -vy and the volt/ma on the vscLast edited by Nrollins04; 01-20-2015, 10:38 PM.Leave a comment:
-
Re: Lg plasma 60pa5500 picture issues
BumpLeave a comment:
-
Re: Lg plasma 60pa5500 picture issues
Here is one of the back of the tv.. Having trouble uploading more than one pic at a time...Leave a comment:
-
Re: Lg plasma 60pa5500 picture issues
Here is the meter...Leave a comment:
-
Re: Lg plasma 60pa5500 picture issues
I have the gauge to test with and I found the sticker u were referring to but I'm not sure where I touch the gauge to test.Leave a comment:
-
Lg plasma 60pa5500 picture issues
I have an lg plasma 60pa5500 that the y sustain board burnt up in. I just replaced the y sus board. A picture now comes on but it's not clear and now the tv cuts off shortly after cutting the tv on. When I unplug the power to the y sus board the tv will come on and stay on with sound. Any help is appreciated.... -
Re: New Members - please post your introductions here
HelloLeave a comment:
No activity results to display
Leave a comment: