Re: Xerox XG-91D (proview I think)

Hello,

I have same monitor, that now starts to give problems, also with the green samxon caps... This monitor turns off after several hours use..

I took some of the samxon caps out and measure the capacity, that seems ok, but ofcause the ESR can be bad... but is that normal?

what about samxon KM series is that better?

Kasper

Re: SMPS Design



10x16 - 78mA

Size may not be bigger and current not less, any good second source?

Kasper

Hello,

I have found a capacitor there fits my requirement for lifetime and ripple current in my desgin, this has a quite high ripple current, and must be 10x16mm, 10uF 400V.

I have found 1 useable from samxon:
EKM106M2GG16XXSA(10u, 400V, 10x16, PVC, KM series)

I like for my production to have another brand for alternative, i have looked at many of the good producers, but can not find another with same ripple current, any suggestions?

Can it be true Samxon just is better to make the capacitor, or is it spec. better than the product?...