Re: Sceptre32 MegMeet mp116 Solved
replaced the caps still no good so gave up and vented my anger with ball pane hammer, actually I feel good now. The tv is for the caravan so rarely gets used so I will just pick up a used one some where seems to be plenty of 32" lcd about. Any brands to stay clear of other than this model.
merrayz
New Member
Last Activity: 01-07-2015, 07:45 PM
Joined: 01-03-2015
Location: Brisbane
-
Re: Sceptre32 MegMeet mp116 Solved
Its ok found somewhere RS components only 10 min.drive from home.Leave a comment:
-
Re: Sceptre32 MegMeet mp116 Solved
would the ones from Jacar be ok or would I have to buy these brands online.Im in Brisbane Australia jaycar is the only place I know for this kind of stuffLeave a comment:
-
Re: Sceptre32 MegMeet mp116 Solved
ok thanks I will replace the 2 caps and see how I go.Leave a comment:
-
Re: Sceptre32 MegMeet mp116 Solved
spoke to soon still going on off as before,off to the tip I guessLeave a comment:
-
Re: Sceptre32 MegMeet mp116 Solved
couldn't get a 2n4011 at the shop so I used a 2n2222A that was supposed to be the same or near enough anyway seems to have solved the problem so thanks "tom thumb" for your post .Why would this be a common issue with these power boardsLeave a comment:
-
Re: Sceptre32 MegMeet mp116 Solved
I have a vivid tv from Aldi australia doing similar things however mine flashes on off when cold if I turn all picture settings to zero the tv will eventually stay on, once warmed up all good. I am heading off to get the transistor now and will replace with fingers crossed.All the caps look ok on the board ,no bulging or leaks so hope this works.Leave a comment:
No activity results to display
Leave a comment: