Hy again, i realized that on low volume -like 7 of 30(max) it plays good, but it sounds like there is too much high tone. Speech also sounds good (when watching a movie).
Just to let you know in case if this helps
kajaalyo
Member
Last Activity: 03-05-2015, 11:44 PM
Joined: 01-03-2015
Location: maribor
-
Re: Samsung max-wb630
Hy again, i realized that on low volume -like 7 of 30(max) it plays good, but it sounds like there is too much high tone. Speech also sounds good (when watching a movie).
Just to let you know in case if this helps
-
Samsung max-wb630
Hy, i recived Samsung MAX-WB630 radio, with broken circuit for headphone jack and cold joint on relay (for triggering subwoofer amp on) on the amplifier circuit board. I resoldered relay joints and jumped 2 wires on headphone jack connector, so that the amp can turn on.
I connected my ectasy 300w sub and 2 Pioneer 110w 6ohm speakers.
Subwoofer sound great, but i wish i could say the same for my Pioneers.
There is ugly sound coming from my Pioneers -high tones sounds terrible, they are some sort of screaming. Like they would be slightly burned. I didnt find anything... -
What is upper layer of Lcd display called?
Hy, yesterday i was repairing backlight problem on my panasonic viera and when i was putting everithing back together i pulled COF out of upper layer of display :SSSSS
Can you please tell me what is this upper layer called so i can search for spare one?
Thanks -
Re: Panasonic Viera 32
Do you know what this upper layer is called, so i can search for spare one? thanks...Leave a comment:
-
Panasonic Viera 32
Hy, i was fixing backlight problem and when i was putting it together i pulled out something :s Now i only got stripes all over the screen :S
[ATTACH]105680[/ATTACH]
[ATTACH]105681[/ATTACH]
Can i do something about it?
Thank youHy, i was fixing backlight problem and when i was putting it together i pulled out something :s Now i only got stripes all over the screen :S
[ATTACH]105680[/ATTACH]
[ATTACH]105681[/ATTACH]
Can i do something about it?
Thank youHy, i was fixing backlight problem and when i was putting... -
Re: Panasonic LCD TV turns off after few seconds! HELP
Hy, it was the backlight problem, plastic behind backlight line was broken, so spark was jumping from + to ground on backplate.
But now i have even bigger problem :SSS
I pulled some part out of upper layer of display :S
Can i do something to fix it? here are the pictures
[ATTACH]105674[/ATTACH]
[ATTACH]105675[/ATTACH]
Please help, i feel like shit right now :S
Thank youRe: Panasonic LCD TV turns off after few seconds! HELP
...Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
Hy, in repairshop they said that its the bad main board, i have a filling that its not. So my question is, if i completly disconnect ccfl inverter and tv still doesnt stay turned on, it can be bad ccfl anyway? thanks!...Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
Hy, so i got call from repairshop today and the problem is that the motherboard is dead. Just to let you know. Repair would cost 170EUR (mobo + work)! I will try to find new mobo myself
Bye
Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
Hy, im done my mom is taking tv to service. thank you for all your help...Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
Ok i figured it out. There is another connection TV_SUB_ON_RELAY_ON in order to turn psu on i connected TV_SUB_ON_RELAY_ON with RELAY_5V6 and STBY_5V6,
Now i can hear relay click when i plug corn in, but nothing shows up :S
[ATTACH]102350[/ATTACH]
Here you can see (left red circle) that there are some ..._ON connections for backlight board, do i need to connect those to something as well? Right circle is that TV_SUB_ON_RELAY_ON that i found.Re: Panasonic LCD TV turns off...Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
No worries, first i powered tv on and test resistance between these two connections, I found that resistance is 0. Than i tried to connect those two without motherboard!...
Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
:S I tried to connect relay to stby but nothing happends :S...Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
Mine does not have ps-on connection, so i must connect stby to something else, maybe relay?...Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
[ATTACH]102345[/ATTACH]
This is wiring diagram, i marked the connector with green circle. I dont get it, i must connect STBY_5V6 to what? thank you!Re: Panasonic LCD TV turns off after few seconds! HELP
[ATTACH]102345[/ATTACH]
This is wiring diagram, i marked the connector with green circle. I dont get it, i must connect STBY_5V6 to what? thank you!...Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
If you stand in front of the TV picture is darker on right side. BLON is pin that i need to short out to turn PSU on or i need to measure voltage from it, if so what should be the voltage?
If voltage disappears this is bad PSU than?
I will also try to test backlights like you tell me!
I will let you know about resoults!
Thank you....Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
Hy, i appreciate you help!
I will try to locate fuse on backlight board! Voltages are not marked on board, but i found them in service manual!
Do i need to look for voltage when disconected and powered on by shorting 2 contacts or do i need to look for voltage drop when tv turns off? Thanks...
Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
Hy again i found only one fuse marked as f101 and its OK! Do you have any idea what this could be?
thanks...Leave a comment:
-
Re: Panasonic LCD TV turns off after few seconds! HELP
Hy, thanks for your help. I will try do that. I will let you know if i find anything....Leave a comment:
-
Panasonic LCD TV turns off after few seconds! HELP
Hy,
I want to fix Panasonic VIERA tx-l32c10p LCD TV. But I cant find out wich part is bad. I recorded the video of whats happening, but I will describe the problem anyway.
1. When I turn tv on it turns on normaly, except the right side of display is darker than left side (this is not visible on the video).
2. Tv then turns off by itself after few seconds.
3. Red light starts blinking and it doesnt stop at all, except if I press any button on the remote (than it turns off and just blink i press any button on the remote).
4. In order to turn TV back on... -
Re: New Members - please post your introductions here
Im new to this forum and just want to say hy to everyone!
If you have some time you can take a look of my post that i will post now in TV section (Panasonic TV turns on and off)
Thank you!Leave a comment:
No activity results to display
Leave a comment: