Re: Hanns-G HG281D, LCD Monitor no power
Parts came today and I got it fixed!! Replaced the 2 capacitors and I am shocked it worked.
I had/have no soldering skills. Radioshack has a $10 off $25 coupon so I bought a soldering iron, solder, and wicking for super cheap. Got the caps from digikey.
I am so happy!
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Hanns-G HG281D, LCD Monitor no power
I saw your link for the exact model in another post. Do you have the links for the other capacitors on this board as well? They seem to cheap to order that it couldn't hurt? Shipping is the real cost when only buying 2.
I was scrolling under the same type and it only goes down to 17uF and it calls for a 10uF 25V...
Leave a comment:
-
Re: Hanns-G HG281D, LCD Monitor no power
I read through all of this thread and I don't know where to start. I have a Digital Mutlimeter and not an ESR meter.
When connected through HDMI the monitor normally stays on for 2 seconds and then goes to black. When connected through VGA sometimes it works and sometimes it doesn't. When it does, it is extremely hazy.
Here are my pictures. Please advise where to start or what to replace! I have a soldering iron and am willing to try it!
I don't see any capacitors out of the ordinary - bulges or...
Leave a comment:
No activity results to display
Show More
Leave a comment: