Re: Need help picking correct capacitor
Thanks for the help everyone I appreciate it.
One more question, one of the capacitors i need is out of stock.
This one here.
[url]http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail&itemSeq=162045948&uq=635529644708059141&CSRT=9148650160248686606[/url]
Would one of these one be a suitable replacement?
[url]http://www.digikey.com/product-detail/en/50YXM47MEFC6.3X11/1189-1884-ND/3563128[/url]
[url]http://www.digikey.com/product-detail/en/50YXF47MEFC6.3X11/11...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
Profile Sidebar
Collapse

MK89
New Member
Last Activity: 12-22-2022, 07:46 PM
Joined: 11-29-2014
Location: Pennsylvania
-
Re: Need help picking correct capacitor
Ok I have been looking at the datasheet and I think I have it figured out.
A question I have though is what does a Y or L at the end of the part number mean.
Example, what is the difference beside size and endurance.
EEUFR1E471Y
EEUFR1E471L
EEUFR1E471
Stj said not to get a L version, but the endurance hours are higher on the L and Y. Should I just stick with EEUFR1E471 even though it has the lowest endurance hours?
Leave a comment:
-
Re: Need help picking correct capacitor
So i need two of these.
[url]http://www.digikey.com/product-detail/en/EEU-FR1V681/P14514-ND/2504783[/url]
And one of these right?
[url]http://www.digikey.com/product-detail/en/EEU-FR1E102/P14424-ND/2433558?enterprise=44[/url]
So it shouldnt matter if they are not the exact same size (diameter and height) as long as they aren't bigger than the old ones?
Also I wrote down all of the capacitors on what i assume is the power supply here they are ( the measurements are as close as i could...
Leave a comment:
-
Need help picking correct capacitor
I have a cheap 32 inch tv that has trouble turning on. It takes 3 or 4 trys to turn it on in the morning.
I removed the back cover and discover 3 bulging capacitors. There are 2 purple capacitors labled as 680uf 35v with a number CD286C on them, and one green capacitor labeled 1000uf 25 v and a number CD286 on it. Both have a logo that says YST and F6 printed on them. I measured them and the 680uf 35v was 12.5mm Diameter and 22mm tall, and the 1000uf 25v was 10mm Diamter and 20mm tall.
I looked for replacements and found these on digikey.com.
[url]http://www.digikey.com/product-detail/en/EEU-FM1V681/P12417-ND/613778[/url]...Last edited by MK89; 11-29-2014, 06:37 PM.
-
Re: New Members - please post your introductions here
Lots of info here. Thanks
Leave a comment:
No activity results to display
Show More
Leave a comment: