Re: Tcon
THANKS for the quick replies Ill run it and note voltages when it shuts down,Once It shuts down if i unplug the ribbon to the logic board which in turn has a ribbon going to the tcon board the backlight wont come on nor the stand by light until i only hook up the logic board by itself and then shut it down then hook all boards back up and power it back up till it cycles again to shut down which could be from one hour to days
tileman
Member
Last Activity: 06-22-2015, 07:53 AM
Joined: 11-16-2014
Location: detroit
-
Tcon
Hi everyone my Samsung ln40b610a5fxzc tv fires up fine runs sometimes for a couple of hours then it shuts off. If i unplug the set and plug it back in, nothing happens ,no stand-by light,nothing. If i unplug the ribbon to the tcon board power up the set the power off the set and hook the tcon board back up it runs fine for some time then i go through the cycle once again.Do you think its the t con board? thanks for any advice... -
Re: Samsung ln46a530p1fxzc image is NEON
thanks Bud im going to order the IC does it mater if the second and third row of numbers on the original IC match the new on or does it only have to be AS15F on the first rowLeave a comment:
-
Re: Samsung ln46a530p1fxzc image is NEON
thanks for your time
Leave a comment:
-
Re: Samsung ln46a530p1fxzc image is NEON
i measured voltages on connector VGMA1-8.6 vgma2-9.6
vgma3-9.9
vgma4-13
vgma5-11.05
vgma6-8.73
vgma7-11.7
vgma8-13.16
vgma9-8.09
vgma10-7.5
vgma11-7.5
vgma12-6.6
vgma13-12.9
vgma14-12.1
vgma15-5.4
vgma16-5.0
vgma17-4.1
vgma18-3.5
vgma19-3.0
vgma20-.65
vgma21-.51
vgma22-.26
VCOM-6.54
AVDD-15.47Leave a comment:
-
Re: Samsung ln46a530p1fxzc image is NEON
here r pics sorry 4 delay...Leave a comment:
-
Samsung ln46a530p1fxzc image is NEON
hi im new to badcaps very interesting sit, my samsung ln46a530p1fxzc picture looks like the people are neon,imaged attached, pull off ribbon cable from tcon board and cleaned the ends, also when the tv is on a music channel the screen appears to be slightly red any ideas thanks jim... -
Re: emerson LC391EM3 trouble
sorry about getting back... holidays...happy 2015 to all...Leave a comment:
-
emerson LC391EM3 trouble
hi guys new to this forum,lots of wise people here my question is when i power up the tv with nothing hooked up to the power supply everything is ok when i hook up the logic board only to the power supply it blows the fuse (black)is it a problem with power supply or logic board
-
Re: New Members - please post your introductions here
hello everyone im new to this forum,u all have lots of years of wisdomLeave a comment:
No activity results to display
Leave a comment: