Hello all,

I am tinkering with a Wacom Cintiq dtz/2100, which is both a monitor and digitizer combined in one device. I purchased it "for parts" non-working for a project.

This monitor uses an external 12v 6.3A power brick. I do not have access to the brick that was used on it when it failed, so can't determine if that was the cause of its failure.

When I power it on the backlight turns on properly when a signal is sent to it and the indicator lights light but there is no image. Using the buttons to navigate the monitor settings also show...

Re: New Members - please post your introductions here

Hello all,

I'm a multimedia developer by day and hardware tinkerer by night. I worked for several years as a computer technician and always had a bit of a knack for identifying hardware troubles; I'm starting to learn a tiny bit about component repair and am enjoying the challenge. I work on a computer most of the day so it's very gratifying to do some tinkering in the "real world."

-Cody