Re: Acer p241w
Ok i'll jot down those numbers and measure the voltages,if i get stuck i'll get back to you....
Maluko75
Member
Last Activity: 03-22-2010, 06:48 AM
Joined: 08-22-2009
Location: land of the mouse
-
Re: Acer p241w
Well i don't have neither at the moment, You think the transformers may have changed poles on neg and pos??Leave a comment:
-
Re: Acer p241w
Ok the part number for the ic's
l101 oz9938gn/75hpu.2n/0731e
l102 oz9982gn/t10368.2g/0725c1
it's blank underneath, and pin 5/6 show blank,but if you check 1/6 it shows 958,956,961,962 all about 955-964Leave a comment:
-
Re: Acer p241w
Ok hope this works..........>>>>>>>...Leave a comment:
-
Acer p241w
Hello to all,it's been ahwile...anyways i,ve opened the panel and visually checked the boards,nothing sems to be buldging or burnt...The screen blinks for a second and goes blank,so i,ve checked caps,resisitors and so forth and have hit a dead end,maybe someone has found a common problem with these lcd's? Any micro info would help,Thanks -
Re: Viewsonic vx910
The underside of the board coming soon.....works got me tooo busy.Leave a comment:
-
Re: Viewsonic vx910
So how do i check the transitors to see if their faulty,i've replaced all those caps on top...Leave a comment:
-
Re: Viewsonic vx910
So on the under side right/ The tiny little transitors?Leave a comment:
-
Re: Viewsonic vx910
Hey Bill i'll go ahead and order the correct caps FC not EB,Maybe thats my problem(Eager to see things work without proper info) you know...Leave a comment:
-
Re: Digi-Key caps
Hey thanks toasty I went ahead and got the ones that are needed,been ahwile since i fickle with electronics....Leave a comment:
-
Re: Digi-Key caps
So they wont work on a power supply?Leave a comment:
-
Re: Viewsonic vx910
I had ordered both series E was longer lasting then the F series...Leave a comment:
-
Re: Viewsonic vx910
Whats the difference in e and f?Leave a comment:
-
Re: Viewsonic vx910
Ok it flashes and shows image then disappears,bill you said c21 even if it's not bulged? Also The caps are the panasonic E series..
Hey Mau-- the transitors on the bottom side #?Leave a comment:
-
-
Re: Viewsonic vx910
:update: I hooked up the vid cable and it'll flash the image but won't stay on constant....??Leave a comment:
-
Re: Viewsonic vx910
I,ve replaced the two caps far right bottom corner and the one under the large transformer.....no cookie...they were buldged..Leave a comment:
-
Viewsonic vx910
My monitor starting blinking green,with of course no display...... -
Re: Dell e152fpb no back light
Here you guys go, and another round of thanks..............
Ya'll be saved in my favorites...
...
Leave a comment:
-
Re: Dell e152fpb no back light
Well a big Presto thanks to Mr Dee and Mr Bill...and i'll send a fresh pic as soon as i get my freakin camera back,,,lolLeave a comment:
No activity results to display
Leave a comment: