Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
need service menu code for Magnavox 43MV346X/F7
hi, my brothers, anybody has service menu code for Magnavox 43MV346X/F7 new smart tv I try 0,6,2,5,9,6 info but no good the tv screen in upside down service menu will help fix this thanks for your info.
-
(DPS-168JP A) Power Supply / LED Board LC-60LE600U
Hi I have and (DPS-168JP A) Power Supply / LED Board LC-60LE600U with no backlights I just need two resistors r7204/r7203 what size are they mine blow up and cannot be read I try so many different resistors and all they catch on fire please see the picture I have circle them thanks...
-
sony kdl-55hx729 with green screen
Hi, I have and sony kdl-55hx729 with a green screen distorted image I could watch the video very clear from the internet but not from HDMI and mainboard adapter plugs. I change the t-con but that didn't fix it please see the image and video any solution would do before I forget I tried the service menu to fix the mapping but couldn't find it in the service menu thanks
[url]https://youtu.be/sHBOkXD0Gg8[/url]https://Hi, I have and sony kdl-55hx...ange the t-con...
-
Re: VIZIO E321VL no dc out put volts on the secondary side of the board
hi thanks i replace that part with a new one i have to put back in the screw when the board start working properly am not sure if some one mess with before me yes this is the right board Vizio 0500-0412-1010 Power Supply / Backlight Inverter.
Leave a comment:
-
VIZIO E321VL no dc out put volts on the secondary side of the board
Hi everyone i have and VIZIO E321VL with no out put volts on the secondary side of the board i bought the power board kit from eBay and still no power on the out put on the secondary side of the power boar i mean no 5v,12v,or 24v i only have ac volts on the primary side please help much will be appreciated....
-
samsung LN32B640R3F with blinking red light
Hi i have and Samsung LN32B640R3F with blinking red light the first time this happen the TV made loud speaker noise then it cycle off and on then it stop and work find for a while until now the red light keeps blinking even when you use the remote you could see the red light sync with the remote and even the touch buttons but the TV never come on it just keep give that red blinking light i even change the SAM caps all of them and still the tv wont power up just keep blinking that red light i even remove the connector cable from the main board to check if the back light was working yes the backlight...
-
Westinghouse WD50FX1120 WITH WHITE SCREEN
hI I HAVE A Westinghouse WD50FX1120 WITH WHITE SCREEN I LOOK FOR VCOM ON PANEL AND CANT FIND IT THIS TV HAS BUILD IN T-CON TO PANEL ANY HELP WOULD BE HELP FULL THANKS...
-
un46d7000lf with vertical lines
Hi to all i have and un46d7000lf TV with vertical lines even when you apply pressure to the tabs the vertical lines do not move i measure the volts on the power board and they are all normal range this is a puzzle any help will do thanks again....
-
lg47lc7df the raster comes on but no picture
Hi i have an lg tv 47lc7df the raster comes on but no picture i change the power board and still same problem exist so i change t-con ams main board still same problem please look at the picture any help will do thanks for your help...
-
Re: kdl-55w802a 8 blinking light
this is the picture if needed...
Leave a comment:
-
kdl-55w802a 8 blinking light
hi i have a sony kdl-55w802a it starts up with quick flash of light on the display then the error light with the sony log on it gives off a bright white light then turns to green and amber then it stops and gives of 8 red blinking lights any help would be help full
-
Toshiba 52rv31ou Regza HDMI Sound Distortion need help with this
No activity results to display
Show More
Leave a comment: