Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks
Not sure if my multimeter read transitors maybe just solder legs and cross fingers
bigbadtom
Member
Last Activity: 12-20-2015, 06:05 PM
Joined: 10-31-2014
Location: Galway
-
Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks
Have to leave it for tonight unfortunately.
tw2005 you mind if I give you private messagage tomorrow?Leave a comment:
-
Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks
Think I have one for 75 euro not too bad. hope it doesn't blow. as regard to getting the sos three didn't happen at0any stage.
wonder why not.
not very electronically experienced so think will take hit on board and hope for best
you agree?Leave a comment:
-
Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks
removed board hope you can see I found issue all eight same component have blown one of its legs.
solution is to buy second board?
but what caused it may cause it again?...Last edited by bigbadtom; 11-01-2014, 12:50 PM.Leave a comment:
-
Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks
Both boards connected it's 4
yes with ss board ( the one to top right in pic) disconnected and the sc connected it's 7Leave a comment:
-
Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks
disconnected the ss board. and sc board at same time light changed to six blinks
reconnected the sc board without ss connected and went to sevenLast edited by bigbadtom; 11-01-2014, 11:57 AM.Leave a comment:
-
Re: Panasonic TX-P42C2l : No Power with 4 LED Blinks
Please see attached any help gratefully accepted...Leave a comment:
-
Panasonic TX-P42C2l : No Power with 4 LED Blinks
hi i have this issue with panasonic tv.
read in other post about disconnecting the sc and ss board and SOS light should change but didn't change
looked for obvious problem like caps on all board but cant see anything that is obviously shorted
anybody any advice for me
mechanical engineer slight electronic experience but not enough
thanks guys -
Re: Panasonic TC-P42G25: No Power with 4 LED Blinks
thanks tomLeave a comment:
-
Re: Panasonic TC-P42G25: No Power with 4 LED Blinks
nope sorry we talking now about a Panasonic TX-P42C2L
sorry forgot to mentionLeave a comment:
-
Re: Panasonic TC-P42G25: No Power with 4 LED Blinks
hi guys
i know long time closed and have to grasp at straws here
have the same dreaded four light flash
any suggestions?
thanksLeave a comment:
No activity results to display
Leave a comment: