Re: Polaroid FLM-3701 no power/ standy light
Thanks guys appreciate it
plbproductions
Member
Last Activity: 05-17-2015, 11:06 PM
Joined: 10-23-2014
Location: Kingman,Az
-
Polaroid FLM-3701 no power/ standy light
Everything looks good no fuses blown maybe the lower bottom cap might be bulged a little but nothing I can see, I order a cap kit today , Am I on the right track?... -
Re: Samsung hl-s5086w popping sounds
Anybody???Leave a comment:
-
Re: Samsung hl-s5086w popping sounds
just and update I found the internal mute button no mute showing on screen now(horray for me). sounds ok, but I'm still have popping when I turn up the tv itself and not soundbar.Leave a comment:
-
Samsung hl-s5086w popping sounds
Ok it's been going out for a month now I changed the sound inputs from the audio out to sound board and it worked fine then it quit for awhile as the time went on then it started popping again this morning it wouldn't work at all and sound on the tv is scramble tweaky best I can describe it lol. so I decided to fix the problem and do and optical out from the dvr to the sound bar, problem resolved you think? nope its still pops after running awhile and gets worse as times goes on. I am using hdmi out of the dvr to the tv, and somehow it feeding back to the soundbar any suggestions? By the way I... -
Re: Philips/Magnavox lc370wx1 (sl) (04)
i removed pin 12 put 3.5 v with 3~1k resistor on pin 12 after board got power inverter would not flash blue again, until i removed the voltage then it flashed. the green light on the on/off switch was still green....Leave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
couldn't find a resistor anywheres never one when you need itLeave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
will try it tomorrowLeave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
Tom66 would you mind taking a look at this and let know what you think?Leave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
Pin 1 Vin 24v
Pin 11 ADIM .883
Pin 12 ON/OFF .883
Pin 13 EXDIM .883v when board flashes 1.3v
I know you didn't say to check it but I did
slave board pin 1 24.0 constant...Last edited by plbproductions; 10-25-2014, 02:10 PM.Leave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
Also could a diode be my problemLeave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
It's 6632L-0283A i did have backlight up until i changed that 2.2ul 450v cap i put the original back in but it still doesn't work...Last edited by plbproductions; 10-24-2014, 08:15 PM.Leave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
The blue light on the master inverter flash for a second to blue then goes out at the same time the power button light goes outLeave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
No picture backlight does not even come on...Leave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
These are the caps i replaced doc is the shipping list...Leave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
that is the 180uf 450v couldn't find a 30mmx36mm...Leave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
first pic is of the master 2nd is the caps 3 is slave 4th is caps 5th is the logic board i believe and 6th the part number and of course 7th is the amp...Leave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
back light flickering less than a second be right back going to unscrew the invertor boardsLeave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
sorry your right the 2.2uf was 50v I couldn't find a fat stubby cap so i replaced it with the long one you see on the board 180uf 450v...Leave a comment:
-
Re: Philips/Magnavox lc370wx1 (sl) (04)
here you go...Leave a comment:
No activity results to display
Leave a comment: