Re: Element ELEFW502 New power supply and still no stand by light or turn on
Yes I did get out working,I ordered the voltage regulators from digikey changed out one and had been working like charm! Thanks to budm for the support!
waynewebb77
Member
Last Activity: 11-19-2014, 08:24 PM
Joined: 10-20-2014
Location: North Carolina
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
After I sprayed our with the air it read 5 volts on the first leg 0.9 on middle and 0.8 on the last leg but after I powered the tv off unplugged and plugged back in I get nothing on it until I sprayed it againLeave a comment:
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
OK i got another question, in the pic i have is this an adjustable voltage regulator because the resisters are hooked to the last pin? and will this part # work
[url]http://www.digikey.com/product-detai...SCT-ND/1967218[/url]Re: Element ELEFW502 New power suppl...t # work<br />...Leave a comment:
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
Whoo hoo, I read that link you give me and watched the YouTube videos it had.I tried the compressed air trick after I found one of the voltage regulaters not reading like it should and bam red light came on. It wouldn't go off so I unplugged it and shot more air on it and it came back on , changed sources on the tv then turned it back off. It is one of the 1117 regulaters. Thank you for your help and guidance.after I change this out my kids are gonna love you!Leave a comment:
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
Ok I will check it out and see if I see any damage, what do the voltage regulaters look like and will it be printed on the board what they are supposed to read?Leave a comment:
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
So i'm safe to assume that the main board is bad?Leave a comment:
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
Ok assuming the T-con is the one that has the multicolored wire connecter,its the only other board on there,i un hooked it and re plugged the power back in and still no standby light.Leave a comment:
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
Ok may sound dumb but is the T-con the one with the multi colored connecter going to it from the main board? if so i just dis connect that and see if i have a stand by light?Leave a comment:
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
these are readings on the little green board with the plug in plugged in to a outletLeave a comment:
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
the 8 wires i have coming from the main connecter on the PSU is as follows
5.25
4.1
5.25
0.0
5.25
5.25
0.0
12.0
does this help any?Leave a comment:
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
ok i will check, the PS ON on the power supply has 5 volts on it i did check that.Leave a comment:
-
Re: Element ELEFW502 New power supply and still no stand by light or turn on
i checked the connecters and im getting reading's on them, there's nothing on the board to tell me what they are supposed to be reading, i just traced the lines from the power supply to the connecters and checked it that way, how would i find out what they are supposed to be?Leave a comment:
-
Element ELEFW502 New power supply and still no stand by light or turn on
Hey everyone I'm new to this. TV went out and i checked the power supply and thought that was the problem so i ordered one and put it in and still no stand by light or signs of life. Here is some pictures of the boards inside and as you can see it was built in March of 2013 cant believe that it already has problems. Any help or guidance is appreciated. Thanks... -
Re: New Members - please post your introductions here
Just found this site while searching for TV repair problems and thought i would join up. Glad to see a good forum like this wish i would have found it sooner.Leave a comment:
No activity results to display
Leave a comment: