Re: Identifying SMD Caps

Yea, I think there should be plenty space for the slighter longer caps.

Awesome, thanks for all the help! Will go about ordering now & hopefully it turns out the problem is just bad caps.

Re: Identifying SMD Caps

Great, thanks, that helps a lot! I'll try it with a couple of 470uF caps for the green ones then.

Just found one more thing - this time on the inverter board. It has six 220uF 35V caps on it (datasheet: [url]https://cdn.badcaps-static.com/pdfs/5fb7b83b2edba3cb4b6159f0755cf592.pdf[/url] ). Do you think the following would be an adequate replacement? [url]http://uk.farnell.com/rubycon/35zlj220m8x16/cap-alu-elec-220uf-35v-rad/dp/1831280[/url] (datasheet: [url]https://cdn.badcaps-static.com/pdfs/ca67598eeb034eb88757e978e8c91d76.pdf[/url] )....

Hey,

My Samsung 305t has started making problems so I'm now about to recap all its boards. Due to my very little experience, I'm having some trouble identifying the SMD caps I need for the logic board, though.

The capacitors have the following labels:
V0033 100 25T
671D 10 50V
V1444 100 16J
67G 220 16V
84151 82 16FA
677FK 100 35V

I assume these simply mean e.g. 100uF, 25V in the first case - is that correct? I'm even less sure about e.g. the penultimate one in the list (I've also attached a photo of the board,...

Re: New Members - please post your introductions here

Hey everyone! Based in the UK and very limited experience so far - here to learn.