Re: Panasonic TC-P50G25 10 blinking light failure.

Just a follow up. Thanks for your help. It was the SC board. I found a brand new board at openboxcity.net for $130 so I bought from them and it worked perfectly. Great forum and very helpful. Micro Mini is a Navy term. I repaired multi-level circuit boards usually with a microscope. I had all the great tools then. I really wish I had a microscope for repair now. My eyes aren't what they used to be.

Re: Panasonic TC-P50G25 10 blinking light failure.

Thanks a lot. I suspected I couldn't use the board. I will double check the sticker when I get home tonight. I will look up your previous thread on repair. I was a micro-mini tech in my earlier years so I should have no problem doing component replacement.\
Ray

Re: Panasonic TC-P50G25 10 blinking light failure.

Quick Question. I have P50G25 TV with 4 Blink on initial power up after plug in that goes to 10 blink after I try the 8 second clear. I tested a short on the P11 which goes away after removing SC20 that tells me it is the SC board. Can any revision of SC board be used to replace? I have a board with no revision but it looks like the AH rev board is the most available. I assume I would install and flash via the SC card.

Thanx,
Ray