Re: Panasonic tx-p50x50b

Thanks mate

Re: Panasonic TX-P50V10B Power Supply ETX2MM747MF-K V7

Sorry, slight correction, I've tested five of the fuses mentioned (F351 F501 F601 F602 F603) but I could not find F201 on the board.

[ATTACH]96892[/ATTACH]...

Re: Panasonic TX-P50V10B Power Supply ETX2MM747MF-K V7

Thanks for the help kasfamily. Following the chart, yes I've got mains into the power supply board, fuses are all fine, but no standby 5V (assuming I'm testing that correctly - pin 9 on P25).

Re: Panasonic tx-p50x50b

Sorry to hijack the thread, but can I ask where you ordered your replacement power supply from? Mine has failed and I'm not sure where to get one from.

Details here:
[url]https://www.badcaps.net/forum/showthread.php?t=41113[/url]

Thanks

IanRe: Panasonic tx-p50x50b<br /> <br ...?t=41113[/url]

Hi,

My Panasonic TX-P50V10B stopped powering on - no standby light. Although I did notice that if I switched the mains power on and off a few times it would sometimes power up into standby and work fine when switched on.

I've inspected the power supply board: ETX2MM747MF-K V7

All looks clean, no swollen caps or signs of overheating anywhere. Fuses all OK. Tried pulling the two biggest caps anyway, but one tested at almost rated value and the other was only 5% under so put them back.

I read that standby voltage should be present on pin...

Re: New Members - please post your introductions here

Hi, thanks for all the information on this site. I have a faulty Panasonic plasma power supply that I'll be asking for help on shortly...

Ian