Re: Name that resistor! From a Rosewill DR-8500BTX
There is a purple wire, when hooked up through the multimeter to one of the black it starts reading and bounces all over the place.
What should it be reading?
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Name that resistor! From a Rosewill DR-8500BTX
The brown ceramic cap shows nothing when testing resistance (.0L), the diode tested ok.
@keeney, the resistor was pushed against the blue cap circled in the first pic, shows a bit of darkness from the resistors casing touching it but looks fine.
Leave a comment:
-
Re: Name that resistor! From a Rosewill DR-8500BTX
If these colors are close Gold, grey, black, yellow (or yellow/grey/black/gold)
4-8-1-5 = 48K Ohms +/- 5%
correct?
Would that be normal on a PSU?
([url]https://itll.colorado.edu/index.php/electronics_center/resistor_chart/[/url])Re: Name that resistor! From a Rosew...ll.colorado.ed
Leave a comment:
-
Re: Name that resistor! From a Rosewill DR-8500BTX
I understand the shrink wrapping but wasn't sure if the markings indicated the resistor under it.
All the other caps and resistors look great, this is the only one that had the shrink wrapping cooked to the point it was falling off AND the resistor coating with the color bands are also flaking off.
Here's the bottom of the board: (black circle top right)
Another shot: (black circle bottom left)...
Leave a comment:
-
Name that resistor! From a Rosewill DR-8500BTX
As much as people state these things are crap, which they may be, this one has lasted me about three years now.
However today I was working on the PC and instantly it just shut down. After troubleshooting it was determined the power supply.
Upon inspecting the inside there are no burnt smells,no bulging capacitors and the inline fuse isn't blown... however this resistor looked burnt out and the black shielding was burnt away.
Here's the culprit:
Can anyone tell me the size I need to get to replace this?
Called Rosewill...
-
Re: New Members - please post your introductions here
Hi all. I'm a at home DIY kinda guy. Work on auto dialers and CRMs ([url]www.akamarketing.net)but[/url] come here for information on the components I tend to have to fix lolRe: New Members - please post your i...ave to fix lolRe: New Members - please post your introductions here
Hi all. I'm a at home DIY kinda guy. Work on auto
Leave a comment:
No activity results to display
Show More
Leave a comment: