Re: Sanyo DP40142 No backlight

R053 is not 85 ohms but the smd code is 05B which is 1k1 ohm (1100 ohms)
I just repaired my Philips 40pfl3208 which uses the same panel.
In my case no backlight and R053 was 7kohm instead of 1k1
I also saw that the connecors between the ledstrips made very poor contact.
You will have to bypass all of these in order to repair it, so that it is reliable.
The led driver passes its power onto a green strip, that transfer it to the horizontal positioned led strips.
I also bypassed these connectors in order to make...