Re: Samsung PN60E550D1FXZA pink noise
Thanks to everyone providing guidance and insight into this issue. I received a replacement Y Sustain module and it has repaired the screen. Now, off to find another project TV and an O'scope for my further forays.
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
Re: Samsung PN60E550D1FXZA pink noise
I know, I know, I sold my Tek 2445 and regret it every day. I have a Y sus module on the way but this is an expensive way to try and fix this set. I have an electronics reseller in the area that has used scopes. I will go take a look and pick one up.Last edited by chuckpen; 02-26-2016, 04:09 PM.
Leave a comment:
-
Re: Samsung PN60E550D1FXZA pink noise
Thanks Flocko,
I will acquire a Y SUS and update once received and installed. I also see what appears to be a pretty thorough repair kit for these boards. Any thoughts on that? I have a good amount of soldering experience so that does not bother me. Looks like a refurb board is about $125 these days, and the kit is about $34. Thoughts on this? Too difficult a R&R?
Leave a comment:
-
Re: Samsung PN60E550D1FXZA pink noise
thank you for the idea. Took the Vscan to -210 VDC without any noticeable change. reset to the factory number on the sticker, -198 ...
Leave a comment:
-
Re: Samsung PN60E550D1FXZA pink noise
Flocko,
Thank you for this step. Ran set in self test and still see the issue. Couple pic's attached. As an FYI had to jumper PS-on to low to get set to start.
[ATTACH]128445[/ATTACH]
[ATTACH]128446[/ATTACH]
[ATTACH]128447[/ATTACH]
[ATTACH]128448[/ATTACH]Re: Samsung PN60E550D1FXZA pink noise
Flocko,
Thank you for this step. Ran set in self test and still see the issue. Couple pic's attached. As an FYI had to jumper PS-on to low to get set...Last edited by chuckpen; 02-25-2016, 05:38 PM.
Leave a comment:
-
Re: Samsung PN60E550D1FXZA pink noise
Flocko,
thanks for the reply. Yes, the exact same screen image with replacement X Sustain module.
Leave a comment:
-
Re: Samsung PN60E550D1FXZA pink noise
More detail
VS-TP 211.8 volts
VA-TP 57.2 volts
VSC - 199 volts
VE - 97 voltsLast edited by chuckpen; 02-23-2016, 10:11 PM.
Leave a comment:
-
Samsung PN60E550D1FXZA pink noise
Hi,
I have a Samsung PN60E550D1FXZA Plasma with a born date of December 2012. Has pink noise color issue. see picture. TV powers on, connects to network, updated the firmware, can watch video but there is a pink cast to the display. Tried the BN96-22114A module, but no joy with that.
As a note: I looked at all caps and found nothing visually bad. I do hear a very slight buzz from the top left and right main boards.
thoughts on next steps?
[ATTACH]128298[/ATTACH]
[ATTACH]128299[/ATTACH]Hi,
I have a Samsung PN60E550D1FXZA...Last edited by chuckpen; 02-23-2016, 04:26 PM.
-
Re: New Members - please post your introductions here
Hello all,
After 37 years in hitech decided to get back to some of the fixing that I enjoyed so much. Already fixed one Samsung LED TV with bad backlight strips. So now on to the next project. Just picked up a defective 60" Samsung Plasma with a born date of December 2012. Hoping for some assistance in isolating the bad part. Will post thread with details and pictures.
Leave a comment:
No activity results to display
Show More
Leave a comment: