Re: Lg LED 42lm580y-tc no picture
60 people watched and no replay ...
am i doing something wrong ? can't anyone help me ?
bil99
Member
Last Activity: 12-02-2018, 05:40 AM
Joined: 09-25-2014
Location: galati
-
Re: Lg 47lw5400
mine is a bit different and also it had a slight water damage as a few drops of water fell on the top and slid all the way down causing some oxidation on the left panel board at the bottom and ever since i have only backlight and no picture
you check it out [URL="https://www.badcaps.net/forum/showthread.php?t=40696"]here[/URL] but no one seems to help me :-\Re: Lg 47lw5400
mine is a bit different and also it had a slight water damage as a few drops of water fell on the top and slid all the way down causing some oxidation onLeave a comment:
-
Re: Lg 47lw5400
it doesn't work properly but in my case i believe the problem isn't the power board , it's probably the tcon or the panel itself.
but nobody helps me so i"m not sure exactly what it is
Leave a comment:
-
Re: Lg 47lw5400
you welcome
i have a similar problem with my LG LED and the voltage on the PWR-ON is 3v as well
not sure if it helps :-/Leave a comment:
-
Re: Lg LED 42lm580y-tc no picture
tested all the voltages on the power board and all looks in order
then i tried disconnecting each one of the cables connected to the the Tcon and here are the results
can anyone please help me
thanks...Leave a comment:
-
Re: Lg 47lw5400
you mean 3v on the PWR-ON pin or on the 24V pin ?
i"m attaching the schematics to this model , maybe it will help you...Leave a comment:
-
Re: LG 42LD650 won't turn on, with standby blue led on
is the back light coming on when turning it on?
do you have a picture of the logic board and tcon as well ?Leave a comment:
-
Lg LED 42lm580y-tc no picture
Hello everyone
i have a 42" Led 42lm580y-tc with no picture and no sound (sound only works when playing Through direct audio in but i"m not sure it counts)
the TV had a small water damage incident before it stopped working
as a few drops of water dropped on the top of the screen and fell all the way to the bottom , the TV worked for a little while and then stopped.
the red led blinks twice when powering it up.(but i wasn't able to find what that means in error code)
the backlight works fine but there is no picture or manu... -
Re: New Members - please post your introductions here
hello my name is bil and i finally decided to join in
been reading a lot of the posts here
i"m an electronics student and i love to repair stuff :-)Leave a comment:
No activity results to display
Leave a comment: