hello there
I recently came by a philips 42PFP5332D/37 plasma TV when I took the back
off I discovered that someone had removed the power board and the
interconnect board so I don't have any part numbers for these 2 boards

Is there a wiring harness between these boards

Is there somewhere I can get a picture of what is supposed to be in the upper
half of the TV so that I could replace what is missing.

As far as I can see the main board the sustain boards are intact
as well as all the boards under the metal housing....

Re: LG 50PC1DR repairing/diagnosing dark picture

Thanks for responding
So do you think that my idea of replacing the two IPM's on the Ysus board will work
and should I replace the Zsus board as well
You see I don't know if the IPM's are the same on both boards or not
the ones I can get are Sanyo SPI50X3E120
are they all the same on both boards

[FONT="Arial"][SIZE="3"][/SIZE][/FONT]Hello
I just acquired from a friend of mine an LG50PC1DR that was headed to a landfill.After I plugged it in nothing lit up at all, so I took off the back and discovered many bulged caps on the power board so I replaced them all with new Nichicon's.

When I plugged it in I got the red standby and after turning it on the sound was there and all the other functions worked (ie:menu,input,ch-select ect). but the picture was very dark or washed out.

After looking at the manual I started to check voltages...

Re: LG 50pc1dr - help repairing/diagnosing problem...

hello
I have an LG50PC1DR