Re: Has the Dell 1800FP exhibited bad caps?

Replace the eeprom ATMEL AT49F001 If you have no video, lamps but no picture or some other weird symptoms it is bad or corrupt. YOu can take it off and read the code and then program into a new one.. Usally we see this bad after the power supply fails and takes out the eeprom prob due to voltage spikes or dirty power. They sell the chip already programmed at [url]www.lcdrepair.us[/url]Re: Has the Dell 1800FP exhibited ba...me other weird

Re: Dell E193FPp problem

YOur lamps are probably fine. THere are usally cracks or bad solder around the legs of the ccfl transformers.Also inspect for cracked solder pads on the legs of he output side of the ccfl transformers. ( very hard to tell unless you wigggle each leg.) I would inspect all solder in this area. Also in the worst case the upper ccfl transformer is usally bad due to heat buildup in the upper part of the case. In that case we sell the whole refurbished board. [url]www.lcdrepair.us[/url]Re: Dell E193FPp problem<br /> <br ...ly fine. THere